Übersetzung für "Sichere geschwindigkeit" in Englisch

Parallel monitoring of multiple protective fields enables safe and reliable reduction of the speed of AGVs.

That safe speed is helpful when the rider rides it in the house.

The safe velocity may be compared to a present velocity of the vehicle in the comparison.

Due notice should always be taken of signs which diagrammatically indicate the severity or numerically indicate the safe speed for the bend.

If the junction does not require a compulsory halt the rider should only enter it when he or she is absolutely sure that the road is clear and it is completely safe to so do.

Approaching the curve or bend, focussing on the limit point and noting any irregularities in the road surface such as inspection covers, the rider should check behind and slow down so as to enter at a moderate and safe speed.

The only difference being that the position that the machine should be in on the road when exiting one curve or bend, should be the correct position for entering the next.

What is important however is that the rider must recognise that the safe speed for the first bend is not necessarily going to be the same speed to safely negotiate the next and subsequent curves or bends.

If, however, a suitable feed rate is established simultaneously, the "safe" velocity makes it possible to prevent such "mechanical" short circuits in all sections following the measurement section.

The instructor must be satisfied that the rider is able to competently judge the safe speed and take a correct, smooth line when negotiating curves and bends.

The SCU slave modules offer safe I/Os, safe speed and a safe position for centralised or decentralised analysis.

Whether to keep a neighborhood with children, a park or schools safer, to keep noise down in a residential area, to save gas on the highway or to keep you driving at a safe speed on the interstate, speed limits and the signs notifying you of them are crucial to the safety of the road.

If the system detects a danger at the current speed, the driver will be notified of a safe speed.

Alternatively, the control unit 30 can also output a brake signal, by means of which the bending press 10 is braked to a safe speed.

For example, a safe velocity of the vehicle, at which no collision risk exists, may be associated with the safe driving condition.

Specifically the first evaluation unit can determine a safe position and a safe speed for the elevator cab, for example, using the sensors and can monitor the current position and speed in line with defined presets for a current operating state.

The first evaluation unit reads in the redundant speed and position signals provided by the relevant sensors and uses these signals to determine the safe speed and the position of the elevator cab.

It is the underlying purpose of the invention to configure a pipe conduit vehicle in such a fashion that a simple and reliable regulation of the speed is possible without having the above mentioned disadvantages.

As the driver has the feeling of having reached already an accelerator pedal position that corresponds to a higher driving speed because a corresponding pedal force is counteracting, the driver is quasi disciplined thereby and induced to observe the speed prescribed or appropriate for safe driving.

Thirdly, risk graphs are drawn up that represent a “safe” speed, at a given instantaneous configuration, mass, surface geometry and part of the body involved in the collision.

Since the eTIS sensors can also detect the remaining tire tread depth, a safe speed for a given wet road condition can be calculated and communicated to the driver.

A v-shaped high-performance hull with a sporty feel and excellent swell properties ensures safe and comfortable speed under all conditions.

Bihl+Wiedemann offers with the speed monitors an effective method for safe processing of signals from sensors and encoders, enabling for example a safety reduced speed for setup operations.

There you will be given the skills you need to safely operate a motor vehicle including instruction on maintaining the legal and safe speed.

To guarantee a safe decontamination are installed speed roll doors or doors that open only at the end of the cycle, allowing the exit of the operator.

With their speed monitor Bihl+Wiedemann offers an effective method for processing safely sine/cosine or HTL signals, enabling for example a safely reduced speed for setup operations.

C. Speed limit protection: when the descending speed exceeds the defined safe speed, the centrifugal deceleration device is activated to slow down the down speed;