Übersetzung für "Material behaviour" in Deutsch

For many materials, linear elastic models do not accurately describe the observed material behaviour.

The calculation of internal forces is performed, considering the elastic material behaviour.

The FEM calculation is performed via a linear-elastic material behaviour with the respective FEM code.

Planning errors caused by incorrect estimates of material behaviour could be avoided in the future.

Further research areas are material behaviour under irradiation and material interaction of reactor materials in light water reactors.

In the reinforced steel cross section, the possibility of superposition is lost due to the non-linearity of the material behaviour.

However, the material behaviour differs during laser processing.

This system is used in the test department to study material behaviour in various load and collision tests..

Especially it deals with the mathematical description of strains, stresses and the material behaviour of continuous bodies.

So-called “fingerprints” in the quality control give a prompt information over continuous material behaviour.

The internal model to capture the incremental default and migration risks shall reflect the nonlinear impact of options, structured credit derivatives and other positions with material nonlinear behaviour with respect to price changes.

The approach to capture the incremental default and migration risks must reflect the nonlinear impact of options, structured credit derivatives and other positions with material nonlinear behaviour with respect to price changes.

The approach to capture the incremental default and migration risks shall reflect the nonlinear impact of options, structured credit derivatives and other positions with material nonlinear behaviour with respect to price changes.

The approach to capture the incremental default and migration risks must reflect the nonlinear impact of options , structured credit derivatives and other positions with material nonlinear behaviour with respect to price changes .

This work will be based on recent results from measurements of pavement response to loads, as well as results from studies regarding traffic loads, pavement performance and material behaviour.

The nozzle ribs at the upper side of the material are formed in such a manner that they cause the same heat transfer and the same pressure action on the material as the nozzle ribs provided at the lower side of the material, the flow behaviour of which and thus also the heat transfer is influenced by the rollers arranged therebetween.

A further disadvantage results from the fact that there is a restricted material flow behaviour due to the weld and associated therewith almost the same material, flow for the upper and lower workpiece, which once again significantly limits the choice of part pairings for parts having different geometries or also the possible complexity of the parts.

This material-specific behaviour is already visible for “normal” injection molded parts and becomes even more substantial for bulky GIT-parts or parts having long flow lengths, since therein the filling times are longer and the pressures are lower.