Übersetzung für "Environmental humidity" in Deutsch

In the same way the environmental humidity influences the temperature inside the housing.

Concrete will always have some amount of residual moisture trapped in it from environmental humidity.

The gas pressure slightly increases and decreases with the change of the environmental humidity.

Temporal fluctuations in environmental factors (temperature, humidity, vibration) can change the position of the projection center.

A digital inverter first uses sensors to gather data about environmental conditions (humidity, temperature) and the motor's rotational speed.

Environmental data (humidity, temperature, UVB radiation and exposure) was collected and stored.

The dissolution time of the aforementioned diaphragm is utilized for this purpose, and the above remarks demonstrate that a time delay that is even merely halfway regulated can hardly be realized, for example due to the previously prevailing, indefinite initial conditions with respect to environmental humidity.

During all of those operations it is in practice difficult, if not impossible, to avoid contact of the metal phosphide with moisture, either environmental humidity or moisture contained in the materials with which the metal phosphide is compounded or laminated or covered and packaged.

The problem is that the number of thereby created electrons strongly depends on the material of the cathode, its surface (roughness, impurities) and the environmental conditions (temperature, humidity etc.).

The cementituous precursors are very much dependent from the actual conditions, such as cement composition, temperature, environmental humidity and degree of hydration of the cement, and can lead to a spontaneous expansion in the cured state.

The inventive arrangement of the components is advantageous in that only two seals are required as a protection particularly of the electronic controller against environmental influences (humidity, dirt, etc.), one of which is disposed between the housing of the electronic controller and the other is disposed between the intermediate body and the pump motor.

If such feeding cans are buffer-stored and are not immediately used for further processing, they are subject to environmental influences (environmental temperature, air humidity).

Particularly in view of extended storage periods of goods under refrigeration and a determined composition of the atmosphere, it is of advantage to record and store all the temperatures, the composition of the atmosphere, the relative humidity, environmental temperature and all further operating parameters in a recording unit in order to be able to determine an orderly or defective operation during storage after the end of the storage period.

The fracture strength measured during a bending test depends on many factors such as the dimensions, cross sectional geometry, surface quality, loading velocity, environmental humidity, the geometry of the test device and the procedure.

Its considerable dimensional stability, strength and resistance to environmental humidity and chemical attack make it an ideal candidate for the creation of structural parts for aerospace, medical, optical, robotics and automation applications.

Dynamic Moisture Vapor Sorption Analysis allows to determine the impact of environmental humidity on the capacity of a material for the uptake or release of water.

High environmental humidity, scented essences and mild temperatures: the steam and aromatic sauna acts in a pleasant, stimulating and purifying way.

Single bit errors can occur in the biometric sample and can be caused by the variation in the biometric characteristic or by changes of environmental influences (temperature, humidity) during the capture of the biometric characteristic.

On the other hand, there are occasional problems with such radiation entry windows with regard to gas tightness, which may lead to damages or a deterioration of the detector properties particularly when operating in bad environmental conditions (e.g. humidity).

In accord with either version, that part of the housing, which is equipped with the first group of electronic components is provided with a high degree of protection to protect the therein installed electronic components from, for example, environmental challenges, humidity and influx of dust.

Moreover, such measuring equipment is as a rule not suitable for operation under adverse environmental conditions (humidity, temperatures).

The necessary cable connections (to and from the sensor element), the environmental constraints (humidity and cyclically fluctuating temperatures limit the useful life of the sensor element) and the costs associated with such sensor techniques, restrict their use and make them unusable for mass applications.

As a result of a handle hole, the contents are exposed to the environmental conditions, in particular environmental humidity, a state which should be avoided in delivery bags.

The inventive method also offers the possibility that the equal and/or concentrated distribution of the distribution streaming step is managed by the for example silicon housing content of nitrate, temperature, humidity, and with various large surfaces that are in contact with the environmental humidity.

In addition, a test on a test track is usually dependent on the environmental conditions (temperature, humidity) and on the test driver (shift points, pedal position(s), steering angle, etc.) and therefore is also not wholly reproducible.

The metal contained in the smoke kit reacts with water that is present as residual humidity in the smoke kit or originates from the environmental humidity, hydrogen being formed.