Übersetzung für "Nachfolgenden prozess" in Englisch

Heat cross-linking polymers are cured in a furnace in a subsequent process.

The edges formed in this manner serve as reference edges for a subsequent photolithographic process.

Thus, it is ensured that no ammonium salt is formed in the subsequent Claus process.

In the following process you will therefore always have to deal with two different connectors with the same part number.

The big bag discharge outlet is opened at its connecting position and the bulk solids are emptied into the downstream process.

Under this rule, before a civil action actually begins, a court could order that evidence which is relevant for that subsequent action be preserved.

Continuous pieces of diaper 52 is now pressed by the pressure roll 44 and transferred to the subsequent process (not shown) in which said continuous diaper 52 will be cut into individual diaper 10 as shown by FIG.

According to the invention, suitable pre-treatment of the polysilicon will ensure that, in the subsequent photolithographic process, adhesion of the resist to the polysilicon layer 9 in the vicinity of the gate 10 to be etched and the contacts to be etched is modified in such a manner that during the etching through the photoresist mask, subsequent to exposure, development and curing of the photoresist, etching angles between 15° and 35° are obtained.

A further example of a subsequent process which extends as far as the protective layer is a furnace process in which, although contamination and/or impurities penetrate through the thin repair layer, they are stopped by the protective layer or by the material of the repair layer which is present in the cracks.

Irrespective of the core material used, the core material should have an adequate compressive strength of at least 8 bar for the subsequent infiltration process (“RTM process”).

In the subsequent proceedings, it became clear that the train's fall from the track did not arise from a technical defect or a systemic error, but rather owed itself only to careless disassembly work towards the end of that night's shift, and deficient oversight of this work.

This ensures that in subsequent steps, process and decision automation is performed based on a validated and approved business rule.

Advanced hybrid design helps to reduce oil circulation inputs of fresh solvent, reducing residual meal, miscella concentration increase, the amount of steam energy used in the subsequent process, thereby reducing energy consumption;

Unlike many other plants, therefore, it is not wasted and instead is used in the downstream helium liquefaction process.

Transportation in solution allows for much easier handling with the polystyrene already dissolved in the required solvent for the CreaSolv® Process.

In a specially developed process the contents of waste water are chemically oxidised by adding oxidants, catalysts, and concentrated sulphuric acid (96%). They are thus converted into a degradable form for the subsequent biological process.

In just a few minutes, a suitable cooler can be selected and its process data calculated in a customer- specific manner – to achieve the most efficient solution for each temperature-critical subsequent process.

The product is crushed by the crushing device and transferred to the following production process.

But the substrate S can also be printed with a soluble ink in the area of the gaps 9 before the metallic reflection layer R is vapor-deposited, and in a subsequent process the soluble ink can be dissolved out together with the metallic reflection layer R on top of it.

In order to check whether the carbon nanotubes withstand the subsequent process of forming the carbon layer 203 without any damage, the substrate 200 was broken and a scanning electron microscope micrograph of the resulting break edge was recorded, which is illustrated in FIG. 2 .

In contrast, if it is necessary for the following process that groups of packages are spaced to one another, this can also be realized with the device according to the present disclosure.

It is the object of the present invention to provide a method for coating base bodies of the type mentioned at the start which enables rapid coating of a base body with detached hard material particles and guarantees reliable adhesion of the latter to the base body until they are anchored by a subsequent process by soldering.

The method provides first for calcining into conventional stucco plaster (beta-plaster), alpha-hemihydrate being partially generated from the beta-hemihydrate in the subsequent process.

In step S 2 the generated product identification 12 is digitally transmitted via a suitable data communication connection to the control device 23 of the marking apparatus 20, which controls the subsequent process of marking (steps S 3 to S 5) and registering (steps S 6 to S 9) of the product 21 in the product database 11 .

As a rule first the wafer 1 is coated with a photoresist 3, then it is exposed through the exposure mask 4 whereby specific portions will respond to a subsequent chemical process, that is, they might be etched free by a solution 6 .