Übersetzung für "Alarm value" in Deutsch

Accordingly, the alarm value is determined as a function of the brightness of the aerosol.

If the operator action is not preceded by an alarm message, the value is set to 0.1.

This also offers additional functions, such as an empty pipe signal or limit value alarm.

In accordance with the above method, a mean alarm measured value is formed for each alarm unit.

Repeat these steps for the Low Alarm value ("*LO AL*").

Two relay outputs (pre-alarm and limit value alarm) switch the process to a safe state in case of an error.

A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

Then it creates new startup key with name Price Alarm and value id.dat.

Based on this solution, a toxic gas dosage warning device which can be worn on the body and which has alarm functions (instantaneous value alarm and mean value alarm) on the one hand and allows subsequent recording of the exposure gradient (gas concentration as a function of time) on the other hand, has been proposed for the first time.

This preselected alarm value, i.e., the thickness of the blanket of snow at which the alarm is supposed to be set off, is introduced into another memory of microprocessor 67.

If, on the other hand, it does not continue to snow hard, or even stops snowing, after the first start-of-snowfall alarm and resetting of the alarm value, then no further alarm will be given.

If the current comparison value is less than the limiting value, a new quiescent value is formed from the current alarm measured value and the stored quiescent value.

The alarm quiescent value is formed from the alarm measured values and is stored in a memory whereby during a first sampling cycle the first alarm measured value corresponds to the quiescent value.

Upon each sampling cycle, for each alarm, the comparison value former VWB forms a new or current comparison value from the measured value MW and the last-stored comparison value VWA.

If the current comparison value VWN does not exceed the rated limiting value GRW, the alarm measured value MW, with the old quiescent value RWA from the memory RWSP are utilized for calculating a new quiescent value RWN, which is then written into the memory RWSP to replace the old quiescent value.

Accordingly, an object of the invention is to develop a method and a device based thereon which finds a solution to the three part problem, i.e. instantaneous value alarm, dosage warning and establishment of the concentration profile for any sensors based on a device of uniform design.

If decision point 78 determines that the calculated result is not greater than the preselected alarm value, another decision point 79 intervenes to check whether a new reference value ought to be taken into consideration.

If decision point 78 ascertains that the calculated result is greater than the preselected alarm value, it initiates the generating of an alarm signal whereby an optical and/or acoustical alarm is set off.

According to one aspect of the invention, a method is provided which determines the alarm value as a function of the ratio of the scattering signals.

Alternatively, instead of the sum of the scattering signals, only the weighted forward scattering signal or only the weighted backscattering signal may be considered for determining the alarm value.

The protection resistors 38, 39 prevent the current from increasing above a critical alarm value in the explosion-hazard zone and the voltage limiter 35 limits in conjunction with the fuse 35 the voltage in the explosion-hazard zone to a safe value.