Übersetzung für "Gleichförmige bewegung" in Englisch

In the exemplary embodiment described, a continuous, uniform movement is considered.

For the operator, a uniform movement of the drawer is achieved in this way.

In particular, this is a uniform movement of both contacting devices.

In this way, a particularly uniform movement can be achieved.

This allows for the most uniform movement and direction of objects within the object path.

Thereby it is possible to achieve a smooth movement even at slow speeds.

What equation of motion can be derived for the uniform motion?

The necessity of parallel swinging can put even wide planes into steady motions.

In this way it is possible to execute a movement that is uniform as regards the movement speed, i.e. is isokinetic.

This is followed by a path on which an essentially uniform movement is maintained.

Thus, a uniform movement of the application device 27 with a predetermined velocity profile is enabled.

Miniature stepper motors ensure the required homogeneous gyro movement and sensitive controllable camera guide movement.

For this reason, it is not easy to attain a resting position or uniform displacement.

As a simple starting point for the calculations, the transition point from acceleration to constant speed can be used.

However, his most important paper was "The physical foundations of mechanics" (German: Die physikalischen Grundlagen der Mechanik, 1883), where he criticized Newton's definitions of inertia, and introduced the expression "Fundamental body" (German: Fundamentalkörper) and "Fundamental Coordinate System" (German: Fundamental-Koordinatensystem), by which inertial motion should be defined more exactly.

This considerably improves the equalizing effect of the flywheel, and only the uniform movement of the flywheel which is isolated from the engine by the damping elements is transmitted to the transmission.

Also an extended crank gear that transforms a constant rotating movement into an oscillatory movement with a corresponding speed is applicable. Then the tracing can be made with the aid of an undirectional motor.

These transport rollers are designed as large as possible to transfer adequate frictional force onto the material and to achieve continuous uniform motion.

However, so that the workpiece holders perform a uniform movement in the transfer path and their arrival at a certain holding position 65 is ensured, it is convenient to equip them with spacers, i.e. devices which predetermine their minimum distance apart.

Furthermore, it is possible to vary the jaw speed as desired during all phases of movement of the operating cycle, so that, for example, an acceleration, a uniform movement, a deceleration and a standstill of the cross-welding jaws, adapted to the respective operating conditions, can be carried out.

In the present apparatus the ridge 28 is formed as an Archimedean spiral, so that it imparts a uniform motion to the gear rack.

If the bars do not require straightening, the rolls of the multi-strand straightening machine 5 are opened up and the total group of bars is advanced solely by the pinch roll set 4 at a definite advance speed, the uniform flying motion of the shear 6 being set to suit this speed rate.

The electric motors 3 assigned to the vertical leadscrew drives 1a are electrically synchronized, producing a uniform, precise movement of the leadscrew drives 1b in the direction of an arrow 19.

In other words, each slot of the link-motion mechanism 40 may be selected so that its shape, its arrangement on the levers and the shape of the path of movement of the pin 41 of the link-motion mechanism are such that each of the two levers performs a substantially similar movement, which guarantees a particularly steady and smooth movement of the two levers.

If the two cam discs are disposed on a common axis of rotation and if the two pivotal levers are connected to a tension spring or can be pressed against the cam discs, that arrangement ensures absolutely uniform movement of the two pivotal mirrors.

Thus, in the case of the mechanical seal, it is difficult to realize a uniform movement of the strip to be coated and the wear at the friction-type seal is too high.

Since the free edge areas that are stabilized with the clamping braces and project toward the cutter move along the straight segment with an unhurried, uniform movement, it is thereby possible to achieve an increased reliability when making the edge cut.

It is in this manner that an opening or closing movement of the gripper elements may be produced, the synchronization means ensuring ganged motion of the two pistons and consequently of the gripper elements.