Übersetzung für "Trace width" in Deutsch

Other technical details such as technology of the vias or trace -width and -spacing will be specified by the designer.

It is furthermore preferred that the supply lines 12 and/or 14 have a maximum conductive trace width, wherein this is then preferably at most 1 mm, but particularly preferably 500 ?m.

The horizontal distance of the trace sections, carrying current from top to bottom, to the neighboring sections, carrying current from bottom to top, in this example is approximately five times the trace width.

I.e., a routing grid specification of e.g., 1.1mm will set the trace width and the minimum distance to 0.55mm each.

Trace Arcs Trace arc segments with a radius smaller than half the trace width could cause display and CAM output problems due to overlapping segment end caps.

All circuit boards with the same specifications can be placed on such a production panel (e.g. FR4 thickness, trace width, solder mask color).The production panel is separated at the end of the manufacturing process by scoring or milling.

Note that H1 is the distance from the base of the traces to the lower plane, W1 is the trace width of each base and S is the separation between the traces in the same plane as W1.

Each routing grid change is stored with the chip layout and also sets the standard trace width and minimum clearance distance values.

Trace arc segments with a radius smaller than half the trace width could cause display and CAM output problems due to overlapping segment end caps.

When editing parallel traces, the Change Width context function does not only allow for changing the trace width but also the clearance and corner rounding mode of the processed parallel trace bundle.

These will be a function of the physical dimensions of the trace (e.g. trace width and thickness) and the dielectric constant of the PCB substrate material and dielectric thickness.

Preferably, the distance between the adjacent edges of the coupling trace sections have a value of about 50% to a maximum of 200% of the specific trace width.

E.g., cutters can be used in the paper industry in order to cut paper traces of maximal width.

The electrically conductive areas 41, 42 and 43 in each case consist of a pattern of electrically conductive, non-transparent conductor traces 40, or alternatively heat-conducting traces, the width of which in the first area 11 is chosen such that the electrically conductive areas of the first and second class and the connection areas appear transparent for the human eye.

It is also possible and advantageous that the connection areas 43 outside the area 11 are covered over the whole surface with the electrically conductive layer 31, or are covered with a pattern of electrically conductive, non-transparent traces 40, the width of which is chosen such that the areas 43 in this area 12 do not appear transparent for the human eye.

The lens-shaped dialectic body, which also protects the transmitting/receiving element from atmospheric conditions, has an arrangement made of electrically conductive printed circuit traces, whose width, at a maximum, constitutes a tenth-wave, and whose distances from each other, at a minimum, constitute a quarter-wave, lambda designating the free-space wavelength of the electromagnetic waves.