Übersetzung für "Switch cycles" in Deutsch

Optimized pressure switch for longer cycles extend the life and saves battery power.

The measured values for three switch opening cycles 16, 17 and 18 are evaluated in the control center.

For compact fluorescent lamps (CFLs) and LEDs, the number of switch on/off cycles that the light source can withstand before premature failure shall be greater than the lamp life time expressed in hours.

It can thus be seen that, while known pressure-swing adsorption systems have all adsorbers run through identical switchover cycles which are only phase shifted relative to one another, the method of the present invention enables the switch-over cycles within the group of auxiliary adsorbers and within the group of main adsorbers, or between adsorber of both groups, to deviate from each other.

EEPROM 26 can also serve, for example, as an operating data memory, for example for switch-on cycles, maximum recorded temperature, operating hours, and manufacturing data.

This stressing characteristic can for example be determined on the basis of the number of switch-on cycles of an actuator, on the basis of the cumulative activation time of an actuator, or the like.

The pressure medium for the tracking movement can be taken from a pressure accumulator without any problems, which saves power-intensive switch-on cycles of the pressure source, and lowers the switch-on frequency.

A temporal profile of a motor current of a motor for opening and closing a switch as a railroad component is plotted over successive switch opening cycles.

The alternating voltage portion can in this case also be implemented by chronologically short switch-off cycles which are preferably short such that a mechanical reaction cannot take place due to the inertia of the brake.

Since when a supply voltage is first applied the coupling-out capacitor which is provided in any case and the intermediate circuit capacitor are charged directly by the supply voltage, the driving potential of the threshold value element cannot pass the switching threshold in a time which is markedly longer than the period duration of the switch-on/switch-off cycles of the step-up converter during operation.

The “burst” operation thereby describes an operation during which the switches of the cycled inverter or the LLC circuit are controlled alternately through a certain number of switch cycles, while this is followed by a predetermined period during which there is no control or during which the switches of the inverter are deactivated or are not switched conductive.

The criterion may be a number of switch cycles and/or a certain duration following activation and/or a value of a feedback variable fed back from the control unit.

Angle seat valves in the form of stop and control units offer a particularly compact construction and stand up to very many switch cycles.

Using switch cycles in modern housing technology enables an economy mode at night and during abscences from home.

Preheating, a high electronic efficiency and low thermal losses increase the service life of these CFLs to about 100,000 switch cycles.

In addition to reliability and ideal conditions for both short and guaranteed switch cycles, smart grids require high levels of data security and protection.

Normally EEPROM 26 is programmed once at the factory via bus interface 30, but reprogramming is possible at any time EEPROM 26 can also serve, for example, as an operating data memory, for example for switch-on cycles, maximum recorded temperature, operating hours, and manufacturing data.