Übersetzung für "Supply fuse" in Deutsch

An inertial generator and/or a battery serves as the power supply of the fuse.

Fuse: Power supply fuse can be replaced in service facility only.

The FU1 for models with output of 0.1 or 0.2 kW is a power supply fuse.

On the rear of the 4064 are the nameplate, power supply, fuse and on / off switch.

Then,check your power supply cable fuse,change it if it is broken.

In consequence, the power supply 3 supplies a short-circuit current via the partial rectifier 1 into the short-circuit path until the power supply fuse blows or the main switch opens.

For this case, the named publication proposes to provide in the supply line a fuse which, given the occurrence of a fault in one branch, is blown by purposive firing of the remaining branches.

The second supply module 1 further comprises a ventilator 90 arranged above the fuse elements 30 in order to supply the fuse elements 30 with sufficient cooling air.

DE 10 2009 057 007 B4 discloses a vehicle, in particular a hybrid vehicle and/or an electric vehicle, having a controllable main switch for a voltage supply and a fuse which protects the main switch against unauthorized operator control.

In order to enable a fast separation of the high-voltage loads form the high voltage supply a fuse 18 is arranged between the parallel connection of intermediate circuit capacitor 9 and discharging resistor 10 and the plug-in terminal 15 .

From each of these two pixels, a portion of the photocurrents is supplied to the fuse element.

Exchange the component groups (e.g. boards, power supplies, fuses).

The interference to the electrical supplies’ fuses is strictly prohibited.

The fuses supplied in all fixing kits are the correct value.

The six figures show six different variants for the arrangement of supply leads and fuses, respectively.

In order to then keep the current consumption due to the fuse refresh operation low, after the first eight RAS cycles the FRSTEP4 circuit only supplies a fuse refresh pulse for every thirty-two RAS cycles or a fuse refresh pulse for every sixteen or eight or four RAS cycles, which can be programmed via two fuse polysilicon bridges FZSTR4, FZSTR5 (the latter is not illustrated for purposes of simplicity of illustration).

Similarly, the redundancy multiplexer 9 2 receives the fuse information FI from the decoder 5 for redundancy bit lines in area 11, while the redundancy multiplexer 8 2 is supplied with fuse information FI from the decoder 5 for redundancy bit lines in area 12 .

We assume here that this coded fuse information CFI on each side of the central bus 1 is output directly, or via control units 6, 7 used during reading or writing, to a redundancy multiplexer (RMUX) 8, 9 via an appropriate fuse bus 4 (indicated schematically by a dotted line) via a buffer and decoder 5 which supplies decoded fuse information FI.

The switching rocker 30 is thus reliably held in its switched-off position, which is of particular importance when it is necessary to carry out repairs on machines or electrical appliances which are supplied via the fused switch unit 1 .

The invention relates to a low-pressure discharge lamp, having a tubular discharge vessel made from glass, the free ends of which are closed off in a gas tight manner, two electrode systems each having a filament, two supply conductors and a bead of glass, the ends of the supply conductors being fused into the ends of the discharge vessel which have been closed off in a gas tight manner and, in order to be held in a region between the filament and the discharge vessel fused seal, into the bead, and a device for switching off the lamp at the end of its service life, comprising a paste which contains a metal hydride and is fitted to the bead.

Furthermore, the glass bead is advantageously not spherical, but rather in the shape of a cylinder or a roll, the axis of which is oriented transversely with respect to the axis of the discharge vessel in this region, the supply conductors being fused in close to the two ends of the cylindrical bead and the paste containing the metal hydride being applied to that part of the bead which is remote from the filament, in the radiation shadow with respect to the filament.