Übersetzung für "Loader program" in Deutsch

The time of calibration can be freely selected in the loader program.

The control unit CU may, for example, manage the program memory M_NV independently of a flash loader program.

The control unit CU can manage, for example, the program memory M_NV independently of a flash loader program.

The "Yellow CD", which comes together with your DV3, contains the Operating System of the DV3 and a loader program.

A loader - every program needs to be loaded into memory by the operating system.

The “Yellow CD”, which comes together with your DV3, contains the Operating System of the DV3 and a loader program.

At least the processor initialization routine, the system test routine and the initial program loader are stored in the ROM 6. Advantageously the basic inputoutput system (BIOS), as well as the entire operating system are also stored in the ROM.

The system test routine and the initial program loader are stored in the storage area M to the extent that they are not already stored in the storage area B0 or B1.

If a program stored in the first ROM 12 or in the external memory is intended to be executed, rather than the bootstrap loader, after the program-controlled unit has been started up or reset, then the first ROM 12 or the external memory must be made addressable via the address 0 by means of mapping.

A principal advantage offered by the invention is that the normally required bootstrap ROM is eliminated, because the initial program loader is simply stored in the mass memory of the primary computer.

Moreover, it is now possible to change the initial program loader routine at any time, since it is no longer fixed in a read-only memory.

It remains thus activated until the initial program loader has been loaded into the secondary computer RE2 and the central processing unit CPU2 of the secondary computer RE2, sends out an ACKNOWLEDGE signal over the ACKNOWLEDGEMENT line QL (L state at the second input R of the flip-flop FF) so that, since the primary computer RE1 is not activated (H state at the first input S of the flip-flop FF), all program memory access instructions from the secondary computer RE2 will thereafter be routed by the memory access logic circuit SZL to the program memory MP2.

Thus, the central processing unit CPU2 of the secondary computer RE2 can access its program memory MP2, so that other programs stored in the mass memory MSP and made available via the shared memory M can be transferred into the central processing unit CPU2 and executed with the aid of the initial program loader.

In method step 200, the software element is loaded into processor 101 via interface 103 and transceiver 102, and then stacked by boot loader software program 115 .

In microcontroller 101, the software element is loaded with a boot loader software program 115 out of a RAM serving as memory, and started, so that the software element configures the algorithm for activating output stages in processor 101 as well as the output stages themselves, and performs the sensor emulation.

Short for NT Loader, a program loaded from the hard drive boot sector that displays the Windows NT startup menu and helps Windows NT load.

At some point, the Linux kernel + mini root image file became too large to fit on a normal floppy boot disk, which also means that the original DSL boot loader program, called SYSLINUX, could not be used to make a bootable livecd disk.

After the loader has been programmed, the external eeprom will be programmed.

For example, a boot loader can be programmed or an FPGA configured.

The circuit board includes an Altera (Cyclone II in BGA housing), Flash-Prom, RAM, as well as two Atmel MCs for the boot loader and for programming the FPGAs boot device.

This proves to be favorable because the address from which the bootstrap loader or other programs to be executed after the starting up or resetting of the program-controlled unit are fetched in conventional program-controlled units is likewise the address 0, as standard.