Übersetzung für "Limp mode" in Deutsch

Furthermore, in the limp-home mode the torque is reduced compared to the normal mode.

Gearbox often goes into limp mode (fail-safe)

Gearbox often goes into limp mode (fail-safe).

After the restart of the software, the system changes into a state 118 which corresponds to the limp-home mode.

In the limp-home mode, a limp-home relay and a clutch disengaged switch prevents gear engagement until the operator has depressed and then released the clutch pedal, and the clutch pedal may be operated to modulate and control gear engagement.

Limp-Home Operation--Start-In-Gear Protection If the tractor is operating normally, and then stops because one of the circuits goes bad to one of the transmission control valves 22, (but not to a valve required for the limp-home mode), then the engine 10 is still running and the lever 36 is still in gear and the operator may have previously stepped on the clutch pedal 44 so that limp-home relay K22 may, at this time, be energized.

When full power is needed and is more important than not damaging the engine or the transmission and the vehicle goes into limp mode, the Limp Override Switch overrides the ECU and the vehicle gets full power if possible.

Alternatively, the electrical energy drawn from the cell stack may be reduced to a value which is barely sufficient to propel the vehicle, allowing driving the vehicle in an emergency mode (limp home mode) home or to a service station or to a repair shop.

The vehicle can still be operated with the full comfort of continuously-variable changes in conversion ratios even in the limp-home operating mode, i.e., if an electrical machine fails.

Furthermore, in limp-home mode compared to the normal mode fewer software functions, for example comfort functions, are active, as a result of which incorrect influences, in particular arising from the switched-off software functions, can be eliminated.

A factor of less than one, for example less than or equal to 0.5, which can be multiplied with the torque M corresponding to the drive situation, is correspondingly selected for the limp-home mode.

In the limp-home mode, the driver of the vehicle can be informed, for example by the lighting up of a warning lamp, that the motor vehicle has to be taken to a workshop for maintenance.

In one advantageous embodiment, the system is changed into a limp-home mode which ensures safe driving with power steering assistance even in the case of a reduced functional scope of the steering system.

In one advantageous embodiment, during the limp-home mode the torque is reduced compared to a normal mode by a factor, in order, on the one hand, to avoid damage as a result of faulty functioning of the software, and in order to alert the driver, by means of the reduced torque, to the particular driving situation and therefore cause the driver to drive cautiously.

In an EC motor that is used to actuate a clutch or to shift a transmission in a motor vehicle, it is possible for the EC motor after detection of a fault condition to continue to operate at first in limp-home mode until the motor vehicle is in an operating state in which the reference run may be carried out largely unnoticed by the user of the motor vehicle.

In this way it is possible to determine the absolute position even in the event of a failure of one or even more magnetic field sensors in order to continue to operate the EC motor, for example, in limp-home mode after the occurrence of a fault condition.

Hydraulic system according to claim 1, wherein the line valve (13) is biased towards a non-bottom limit line pressure, such that in a fail-safe mode, when no actuation to operating elements is provided, the line pressure is set to a predetermined line pressure resulting in sufficient actuation of the friction elements (2, 3) to provide for a limp-home mode of the vehicle.