Übersetzung für "Full load hours" in Deutsch

The goals are higher yields from wind turbines, more full-load hours and lower environmental impacts.

Such a configuration increases the number of full load hours.

Industry forecasts suggest an average value of 3,700 full-load hours per annum at sea.

A power plant of this kind could produce up to 3,600 full load hours, which would qualify it as a medium-load power plant.

Oversizing, the type of panels, and the expected full-load hours all play a role here.

In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent.

The limit for the reasonable use of renewable energy in district heating networks is, because of the necessary high full load hours, the summer distribution.

The electricity generated by alpha ventus was thus around 15 per cent above the forecast annual rate of 3,900 full load hours.

The four cogeneration modules can be operated with a high number of full load hours: cooling is required throughout the year for equipment and sensitive spaces while surplus heating and cooling energy can be fed into the utility company's network at any time.

Example: Comparing the measured and grid-optimal power consumption profiles of 38 heat pumps in residential buildings shows that at least five full-load hours of storage capacity are needed to achieve grid-optimal operation throughout the year while meeting the building's thermal load requirements.

In the planning of wind farms, however, the past experiences have shown that current offshore sites now generate around 4,000 full-load hours per year for the turbines – mathematically, this means that they run "full throttle" nearly 50% of the time.

In typical IEC-3 locations, the N117 turbine achieves a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent.

Nevertheless, a growing demand for comfort air conditioning can also be expected in Germany, even if the number of full load hours per year will be low in many applications.

At a wind speed of 7.5 m/s the turbine delivers a net wind farm capacity factor of up to 42%, equivalent to 3,600 full-load hours each year.

When the full productivity (6,000 full load hours, 18,600 MWh/a power generation) is reached, about 12,000 t carbon dioxide, more than 7 t sulfur dioxide, and nearly 11 t nitrogen oxides are avoided annually and thus a contribution is made to the climatic protection and the improvement of the air quality.

In typical inland regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent.

As a result of these problems, many of these plants are unable to achieve the projected annual number of full-load hours, which has a substantial impact on their cost efficiency.

Buffer storage systems typically have a capacity of 1?2 to 1 full-load hour, whereas large storage systems with 8 to 12 full-load hours enable power plant operation around the clock.

When viewed against total system costs (including storage, for instance) and the maximum number of full-load hours possible, many renewables are still unable to compete head to head with existing conventional fossil fuels.

Overall, the aforementioned control options can improve the economic viability of a power plant (more full-load hours, constantly available grid services, additional “fuel” product (methanol and methanol conversion products)).

The ultimate outcome is that the power plant can then be operated with a higher number of full-load hours, since it is not just designed for power production but also for methanol production or the production of methanol conversion products.