Übersetzung für "Bit selection" in Deutsch

The bypass bit selection circuits 96 (j) include 80:1 multiplexers.

The data word and the selection bit register contain the same number of bits.

The selection bit register also consists of n selection bits.

A selection bit indicates whether the associated data bit is to be selected or not.

The transponders compare the respective bit of their identification bit sequence with the corresponding selection bit on the basis of a comparing criterion.

At a first clock time, each multiplexor passes on byte B0, at a second clock time byte B1, etc. up to byte B7, to bit selection logic 12.

This means that not all levels of the multiplexors, not all AND gates of the bit selection logic, and not all sets of functional units according to FIG.

The increase in the sense current from the sense circuit after bit line selection decisively determines the access time to the storage cell.

The bypass switching register block 90 likewise has foreground register blocks and background register blocks, which are read out via 32 corresponding 8×2:1 multiplexers 98 (1) through 98 (32), whose outputs lead to bypass bit selection circuits 98 (j), where j=1, . . ., 32.

Once the evaluation operation has been completed, the two transfer transistors 16 and 17 are switched to conductive by a bit line selection signal at the bit line selection input CSLE, and the bit lines BL and BLN are switched through to the IO outputs IOA and IONA.

If the bit line block selection signal now receives high potential from the column decoder CDEC1, the driver transistor NTn+1 becomes conductive and the local SANN line is brought relatively quickly to reference potential.

Since the driver transistor NTn+1 of the selected bit line block only becomes conductive, by means of the bit line block selection signal BSL, at a time n+1 after all n stages of a local SAN driver have already been switched on, the drive line SENx of the nth phase (x=n) is sufficient for driving the selection transistor ST.