Übersetzung für "Bar attachment" in Deutsch

The attachment bar 25 and the support bar 27 are riveted together in a non-detachable manner.

Now the selected images are inserted as attachments in the Attachment Bar.

As in th s case all the bars of the bar attachment means are moved in the same forward direction, few breakdowns occur.

There is also an energy saving, if the heated, climatically controlled bar attachment means is positioned as the first section directly upstream of the first climate zone or the rapid heating zone.

The dough strands leaving the press head and which may have undergone surface treatment with ventilating air in the aforementioned manner are placed mechanically over a bar attachment means and are then directly cut on reaching the desired leg length (accompanied by the formation of a U-shape).

As in this case all the bars of the bar attachment means are moved in the same forward direction, few breakdowns occur.

A support bar 27 is riveted to this attachment bar 25 (by rivets 29) and is provided with curved, resilient or rigid tines 28.

FIG. 2 shows that the end piece 3 for the shoulder belt strap 17 has on its lower side a depression 23, in which an attachment bar 24 is provided for mounting the end region of the belt strap 17.

In the central region of these resilient strips 12 which are bent at one end, a two-part attachment bar 14 is likewise adjustably secured by means of screws 15, with individual bristles 16 being provided therein.

For this attachment bar 14 which is provided with besom or bristle tufts 16, the resilient strips 12 form slide rails along which the attachment bar 14 can be slid upwardly and downwardly when hand nut 17 is loosened, with the result that, in the lower position, the tufts 16 protrude below the free, lower ends of the resilient strips 12 so that the hand implement can be used not only as a rake, but also as a besom or brush for sweeping.

In this design, the first shaft is connected at both ends to the base in a non-positive way by a bar-shaped attachment, preferably below the applicable bearing points.

To discover which core is really in the processor it's necessary to open the case with skill, intuitive feeling and also (at the right lower attachment bar) by force.

From now one, the specified type of attachments will open directly when you double click them in the Attachment Bar, and the Opening Mail Attachment dialog box won’t come out never.

The forces F or F w are transmitted via the Al bar to the attachment block L 1 and from there to the floor plate B, wherein the Al bar is, however, stretched in the thin regions near the surface of the floor plate (x/z plane) and on the opposite measurement side in the s-direction.

Sufficient rigidity is achieved in the area of the second end 9 via attachment of the grain lifter 10 on the support bar 5 . The area of the support bar following this attachment up to the holder 11, as can be seen from FIG. 3, is arched, to achieve the necessary rigidity.

Since in the case of a fracture of the torsion bar or of a torsion bar attachment a continued, reliable steering of the vehicle by means of the steering wheel must be ensured, design safeguard measures have already been proposed which make sure that in such cases a mechanical connection exists between the input shaft and the output shaft.

Accordingly, the housing opening in the sensor housing, which is provided at any rate, for a rotational angle sensor and/or a torque sensor is matched to the input shaft with such a precise fit that in the case of a fracture of the torsion bar or the torsion bar attachment, an edge of the housing opening constitutes an axial stop and reliably prevents an axial movement of the input shaft relative to the steering column tube with little effort.