Übersetzung für "Trigger hook" in Deutsch

THe trigger hook 182 is subject to the action of a spring 182b which bears on the tab 114e, while the control-sleeve hook 183 is subject to the action of an operating lever spring 183b.

The sleeve hook 183 is secured in this blocking position in that a support face 182c of the trigger hook 182 rests on a counter-support face 183d of the control-sleeve hook 183.

This pivoting movement of the trigger hook 182 in the clockwise direction is greatly stepped down by the fact that the first pressure stop 172 lies quite close to the pivot bolt 133.

Only when the pressure point stop 174 has come to abut against the trigger hook 182 and the trigger 132 is pressed further does an accelerated movement of the support face 182c in relation to the counter-support face 183d occur with the increase of resistance (pressure point), so that the support face 182c and the counter-support face 183d depart from one another.

The hook 182, since it co-operates directly with the trigger 132, will be designated as the first or trigger hook 182, while the other hook 183 is designated as the second or control-sleeve hook 183, because it co-operates directly with the control sleeve 165.

The remaining overlap between the support face 182c and the counter-support face 183d, which is still to be travelled when the pressure point stop 174 has once come against the trigger hook 182 is responsible for the moment of entry and the fine sensitivity of the pressure point.

This pivoting of the trigger hook 182 in the clockwise direction during the past-cocking travel of the control sleeve has the consequence that the face 182e disengages itself from the right end edge 183e of the sleeve hook 183 and then this sleeve hook 182 can pivot under the action of its operating lever spring 183b in the anti-clockwise direction again and its blocking nose 183c can enter the opening 165a.

The trigger hook 182 on the other hand is secured in this support position by the spring 182b, and this readily suffices because the support force generates practically no moment about the pivot bolt 182a.

When the control sleeve 165 moves to the left under the action of the helical compression spring 171, the nose 183c places itself in engagement with a face 165c of the control sleeve 165 and the trigger hook 182, after releasing the trigger 132, places itself under the action of the spring 182b with the face 182e in frictional engagement on the end edge 183e.

This rug has a perfect fit thanks to the combined trigger hook and Velcro chest fastening as well as adjustable leg straps and crossed surcingles, waschable up to 30°C.

Nevertheless, there is a high degree of design freedom with regard to the appearance (shape of the handle and spray head, weight) and their specific arrangement as well as the attachment (shape of the trigger, hook and devices for adjusting the paint flow).

In one embodiment, after the linear movement of the trigger button, the hook hooks into a recess of the housing or behind a projection of the housing.

During the linear movement of the trigger button, the hook can, for example, slide over a ramp-shaped projection of the housing and, after the linear movement, can hook in behind the ramp-shaped projection.

The control parameters linked with these Trigger Detection Point TDP 1 are set in such a way that, each time a connection setup is initiated by these external subscribers—for example by picking up the receiver (off-hook trigger)—, a program sequence which opens a TCAP transaction with the control switching device LE 1 is activated by means of the Trigger Detection Points TDP 1 .

As an alternative, notification of the receiver being replaced can be achieved by a separate “On-hook Trigger”.

Put simply, a Trigger Hook is a double-ended catch that works similarly to the catch you will find at the end of a dogs leash.

The auto blog plugin has to use WordPress’ wp_insert_post function to save the posts or trigger the save_post hook after it saves a post.

The mechanical anti-panic locking system with automatic security via two self-triggering hooks and latches in the variation panicLock M 179 (according to DIN EN 179) with switching function E (continuous follower) fulfils all requirements for a quick opening function from the inside, yet still provides protection from the outside thanks to the sturdy hooks.

A suitable locking device, for example a simple hook, can then hold the spring system in the tensioned state until the lancet system is triggered, whereupon the hook is freed and the spring system is released and acts on a lancet.

The closed position of the flap 10 is monitored via the bifurcated light barrier 15 which is fitted on the circuit board 8 with protection and is triggered by the hook or arm 15 on the flap 10 .

Moreover, before the puncture movement of the lancet is triggered, the hook can hook the trigger button to the housing in another position in order to prevent detachment of the trigger button from the housing before the puncturing process is triggered.

For this purpose, two projections can be provided in the housing for example, these projections being arranged in such a way that, before a puncturing process is triggered, the hook is hooked in behind the first projection and the trigger button cannot therefore be detached from the housing, and, after the linear movement of the trigger button, it is hooked in behind the second projection, so that the blocking element (rotary drive element) blocks the support surface.

The two catches move smoothly, and while I always apply a little oil to Trigger Hooks, these ones arrived operating smoothly and responsively.

These double ended snap hooks (also known as Trigger Hooks) from House of Eros are good quality and reliable accessories.