Übersetzung für "Logical terminal" in Deutsch

For a resource-independent realization of a switching subprogram module CPS, several logical terminal subsegments LUP are allocated to a connection segment LINK for the duration of a connection.

Here the physical switching subprogram module PSS receives information from the logical switching subprogram module LSS only through the transmission of logical terminal subsegments LUP, for example, as to which terminal of the ATM coupling field module ASN is to be connected with which.

The allocation into a logical terminal subsegment LUP is carried out in the physical switching subprogram module PSS, and the allocation to connection segments LINK is carried out in the logical switching subprogram module LSS.

Here, on the basis of the information vpci. . ., vci . . . contained in the logical terminal subsegments LUP and representing the physical resources R, access program modules ATS execute all functions relating to the parameters of a connection (for example, virtual channel and path number as well as the maximum cell transmission rate) that are to be taken into account by the communications system KS during the setup and tearing down, or, respectively, during modifications, of connections.

In the logical switching subprogram module LSS shown in FIG. 2, the physical resources or, respectively, characteristics of the ATM useful channels (not the signaling channels) are abstracted to logical terminal points in the connection segments LINK formed for the duration of a connection.

This includes, for example, the logical connection setup and link disconnection between two or more selected terminals, a logical assignment between terminal and IP address, on the one hand, and subscriber names, on the other hand, and other means allowing higher abstraction levels to have access to the data flow between the terminals.

In the operating system Unix, normally you do not use a physical terminal but a logical one, a so-called terminal emulation, a logical terminal.

Originally, the critical path method considered only logical dependencies among terminal elements. A related concept is the critical chain, which adds resource dependencies.

All system-specific settings are stored together with the application in the TwinSAFE logic terminal.

The safety option card communicates directly through the AX5000 with the TwinSAFE logic terminal present in the network.

All safety devices in the plant communicate with this Logic Terminal.

The TwinSAFE Logic Bus Terminal or the TwinSAFE Logic is the link unit between the TwinSAFE input and output terminals.

Communication between distributed TwinSAFE Logic terminals is very simple to implement with TwinCAT software.

This application is then loaded over the bus to a TwinSAFE Logic Terminal of type KL6904 or EL69x0.

Due to the enormous flexibility of the system, however, several TwinSAFE Logic terminals can be operated simultaneously in one network.

During each startup, the Logic Terminal distributes the safe application parameters to the configured input and output terminals.