Übersetzung für "Thermal interface material" in Deutsch

The bonding agent can be in particular a TIM (thermal interface material).

In addition, the modules are optionally available with thermal interface material (TIM).

Each kit contains an LED holder, a cable assembly and a thermal interface material.

Many products are available with Thermal Interface Material (TIM) pre-applied.

If the thermal interface material is damaged, you must also replace the fan heatsink.

Normally the PCB is connected with the heat sink via a thermal interface material (TIM).

Thermal interface material (TIM) is critical in providing effective heat transfer from the processor to the fan heatsink.

Thermal solutions that come with Intel® Boxed Processors use pre-applied Thermal Interface Material (TIM) and do not need grease.

Infineon's thermal interface material TIM not only provides the lowest thermal resistance, it also fulfills the highest quality standards for power modules to achieve the longest lifetime and highest system reliability.

Simply select or enter your values and heat conductor material according to the instructions and "Dr. Heat ® " will calculate for you what the effects on the semiconductor cooling are, depending on the chosen thermal interface material and determine if it is suitable in calculation for the application.

In most applications, IMS circuit boards, along with a thermal interface material (e.g. thermally conductive paste), are attached to a heat sink by screws.

If you need additional Thermal Interface Material, and have a boxed processor that is still within the warranty period of three years, contact Intel® customer support for TIM.

For an optimized performance and keeping customer ?s production fast and clean, the next portfolio extension will be pre-applied Thermal Interface Material (TIM).

The interface layer can advantageously be a thermal interface material (TIM) such as a heat conductive paste (for example silicone oil with additives of aluminum oxide, zinc oxide, boron nitride or silver powder), a film or an adhesive.

The thermal interface material can advantageously extend laterally beyond the carrier over an inner edge and/or an outer edge.

The leakage path can consequently be lengthened at the respective edge by the length by which the thermal interface material laterally projects beyond the respective edge.

A leakage path at an edge of the carrier can consequently be lengthened even further since a leakage current then has to cover an additional distance from the edge of the base material layer to the metal layer and further from the base material layer to the edge of the thermal interface material.

Together with the thermal interface material a leakage path or insulation section which is particularly compact in the lateral plane is thus produced which is S-shaped in depth.

The carrier 6 is connected on the underside to the contact surface 24 and the plane front face 5 by way of an electrically insulating and adhering interface layer 29 made of a thermal interface material (TIM).

In order to improve the thermal contact between lighting module and module support, what is known as a thermal interface material (TIM) is often introduced between the lighting module and lighting module support and improves the thermal contact in particular by compensating for unevennesses.

Additional options are providing an insulating layer by using a so-called thermal interface material (TIM), or at least another insulating layer by means of additional compressing.

Contact Us about how we can help you select and optimize your Thermal Interface Material in your application.