Übersetzung für "Hard vacuum" in Deutsch

The design of the labels for hard floor vacuum cleaners shall be the following:

They'll be exposed to hard vacuum... in 29 minutes.

A couple hours of hard vacuum will do him good.

In a second embodiment, the essentially cold rotor rotates in a hard vacuum.

The microscopy is preferably carried out in a hard vacuum.

This limit shall not apply to hard floor vacuum cleaners,

The air rushed out of holes on both sides of the room, which means we're surrounded by a hard vacuum.

The mass flow meter according to claim 9 further including soldering the connecting tubes (11) to the respective reinforcing tubes (12), said soldering being vacuum hard nickel alloy soldering with a soldering temperature of about 1000° C.

The mass flow meter according to claim 11, and further including soldering connecting the connecting pipelines (11) to the respective outermost cylinders (12), said soldering being vacuum hard nickel alloy soldering with a soldering temperature of about 1000° C.

Effective thermal insulation can in this case be achieved only if the cryogenic parts of the machine are separated to as great an extent as possible from the hot outer area by hard vacuum with a residual gas pressure of in general less than 10-3 mbar and if the connecting parts between these cryogenic parts and the hot outer area transmit as little heat as possible.

In the embodiment of the beam head shown, the vacuum housing 1 forms, together with the beam finger 3, a permanently hard vacuum-tight vacuum shell 6 that is made, for example, from stainless steel.

However, an arrangement such as this requires shaft seals which are proof against the hard vacuum, between the rotor and the stator (see, for example, DE 27 53 461 A1).

Effective thermal insulation can, in this case, be achieved only if the cryogenic parts of the machine are as far as possible separated from the warm outer area by a hard vacuum with a residual gas pressure of generally less than 10 ?3 mbar, and if connecting parts between these cryogenic parts and the warm outer area transmit as little heat as possible.

However, an arrangement such as this requires shaft seals which are proof against a hard vacuum between the rotor and the stator (see, for example, DE 27 53 461 A).

Thermal excitation by means of inelastic compression of the emission mass can be used for applications in a hard vacuum, since a small mass density is required to achieve high Alfvén velocities for this purpose.

The second process chamber 80 is a reactor chamber, which is located in a hard vacuum.

I also found that I got quite sore the first few times that I pumped, but once I made sure that I didn't create such a hard vacuum that didn't happen again.

Carpets from the beginning on the first day of use, with daily vacuuming thoroughly, not tomorrow have a good thorough thought, once the dust precipitation accumulated daily vacuuming hard to clear.

Size: 16 Suction cup material: Polyurethane PU Material hardness: 60 °Sh Vacuum connection: G1/8"-M This item is not available online in your country.

Size: 13 Suction cup material: Silicone SI Material hardness: 55 °Sh Vacuum connection: G1/8"-M This item is not available online in your country.

Size: 9 Suction cup material: Polyurethane PU Material hardness: 60 °Sh Vacuum connection: M5-F This item is not available online in your country.

Size: 16 Suction cup material: Polyurethane PU Material hardness: 60 °Sh Vacuum connection: G1/8"-F This item is not available online in your country.

Size: 13 Suction cup material: Polyurethane PU Material hardness: 60 °Sh Vacuum connection: G1/8"-M This item is not available online in your country.