Übersetzung für "Grid connection point" in Deutsch

The supply grid can then provide a relatively high short circuit power at the grid connection point.

This and other net properties must be seen in particular in relation to the grid connection point.

The output of the transformer 308 can be regarded as a grid connection point 310 .

The grid analysis is specifically performed for the existent or planned grid connection point.

Preferably, a threatening loss of stability on the grid connection point is detected and/or shown.

This grid sensitivity is a characteristic related in particular to the grid connection point.

How can I configure an energy meter at the grid-connection point?

There can be only one master and one grid-connection point within an overall system.

Dynamically specified values for reactive power or powqer factor are managed at the grid connection point.

Hence, electrical current is injected into the three-phase grid by means of an injection unit at a grid connection point.

In addition or alternatively, it comprises the incorporation of a connection between the fed-in active power and the grid voltage at the grid connection point.

Voltage V PCC is the voltage at the grid connection point standardized to nominal voltage V N .

Further, the current grid condition can have an impact on the sensitivity of the voltage at the grid connection point.

Here, measurements are performed in grid 4, in particular on grid connection point 2, and are evaluated accordingly.

With decreasing reactive power Q, i.e., to the left side, the voltage at the grid connection point decreases.

Network tariffs for very large-scale industrial customers (connected to national grid at the 110 kV or above level) consist of a consumption fee, use-of-grid fee and connection point fee for the grid service.

To this end a large energy feeder/energy consumer EE, which is connected via its own grid connection point 5 a to the ring circuit 1, is changed from its purely power-optimized operating control.

Here, too, many consumers V are connected to the stub line 13, wherein the weakest consumer V at the end of the stub line 13 is connected to the stub line via a grid connection point 5 b .

Reactive power helps to stabilize the grid voltage and compensate for the phase shift that exists at the grid connection point.

Clusters can then provide joint balancing power (here it is sufficient when the generators are in the same balancing zone), help maintain the voltage by providing reactive power (here all generators should be connected to one grid connection point) or be involved in managing grid bottlenecks.