Übersetzung für "Wärme abgeben" in Englisch

Finally they shall dissipate the heat taken up to the outside.

Because the muscles are doing all of this work. They're releasing heat.

You decide how much heat your stove should emit.

The floor is heated in large surfaces, and distributes the heat evenly.

These resistors have electric current flowing through them as required, as a result of which they give out heat in a known manner.

The air conditioning in the bedrooms and living room can both cool and heat.

At this "comfort temperature", the body neither has to produce heat nor release excess heat.

The heated damping medium contacts the wall and can thus dissipate the generated heat immediately to the exterior.

As a result, the LEDs in the lower region of the advertising panel can emit their heat upward.

Heat patches are that release a pleasant heat for 8 hours maximum are also available.

Such pallets are heated for a long time, but they also give up heat much more slowly.

Blood vessels dilate in the hope of emitting as much heat as possible.

An emission spectrum essentially means that different materials radiate heat of various wavelengths within different temperatures.

The transformer then needs to be small and efficient for instance – and to emit as little heat as possible.

These entirely novel bulbs can also work with rheostats, emitting very little heat.

Devices shall be designed and manufactured in such a way as to reduce to the lowest possible level the risks arising from the noise emitted, taking account of technical progress and of the means available to reduce noise, particularly at source, unless the noise emitted is part of the specified performance.

The heating system shall apply heat evenly to the tank walls beneath the level of the fuel so as not to cause local overheating of the fuel.

Some microprocessor manufacturers offer good value processors that release less heat (a real problem for air-conditioning in server rooms) and consume less energy.

These data are combined for all the streams in the plant to give "composite curves", one for all "hot streams" (releasing heat) and one for all "cold streams" (requiring heat).

These data are combined for all the streams in the plant to give composite curves, one for all hot streams (releasing heat) and one for all cold streams (requiring heat).

During the maintenance period between 00.00 and 03.00, the drybulb temperature and the mixing ratio at measuring points KP 2 and KP 3 drop, as the electrical equipment is not operating and therefore no heat is being given off nor any water being sprayed.