Übersetzung für "Selbstklebende folie" in Englisch

A self-adhesive film produces a homogeneous bonding surface and can be cut precisely into shape.

It is glued to the marking member 21 as a one-sided self-adhesive film.

The inscription is a self-adhesive Micro Application film.

The adhesive foil adapts and sticks to nearly all surfaces.

This adhesive film has a threefold function.

Alternatively, there can also be employed a self-adhesive foil 51 or an adhesion promoter.

Alternatively, however, a self-adhesive film of plastic can also be used.

The antiglare modules 12, 14 can be embodied as self-stick film, for example.

The plastic clips are easily installed due to the self-adhesive backing.

We designed our 820, self-adhesive film for the Braille system.

Self-adhesive vinyl reflective film, long duration guaranteed for 8 years.

The self-adhesive film is simply glued to the well-prepared nail and sealed.

The charging coils are characterized by a self-adhesive film on the back.

PET film is a non-self-adhesive film of polyethylene terephthalate.

The self-adhesive foil can be mounted on the outside at the bottom, the sidewalls or at the top.

A self-adhesive film can also be readily retrofitted to existing grippers (for instance, suction grippers or magnetic grippers).

The inner conductor strips LI can also be formed by self-adherent Cu foil with the same thickness.

Such an, in particular self-adhesive, film facilitates the application of the coating on the holding-down device.

As to protect your camera display as well, one self-adhesive foil is also included in delivery.

Plastic caps can be replaced with a self-adhesive film that can be non-residually removed.

The self-adhesive film, for indoor and outdoor use, offers the following advantages:Â

The self-adhesive zombie window decor is easy to apply and easy to remove.

The self-adhesive film which is cut into strips is bonded radially around electrolytic capacitors, the ends of the film overlapping by 3 mm.

Finally, the self-adhering foil 6, which has carried hitherto the semiconductor chip 5, is torn off and the assembly comprising the carrier body 4 and the semiconductor chip 5 is inserted into the recess 14 of the card body 3 of PVC (see FIG. 1) and both parts are compressed between an upper covering film 1 and a lower covering film 2, which likewise consist of PVC, under pressure and at elevated temperature, and, while maintaining the pressure, then cooled in such a manner that the finished data card has the standardized thickness of 0.76 mm.

When more infrequently used printing papers are employed, there is the option to laminate to the desired printing paper a one-sided self-adhesive film without using an organic solvent.

A very important requirement for some applications is the possibility of peeling off the self-adhesive tape or the self-adhesive film, which has been stuck for a long time, from various surfaces (metal, plastic, glass, etc.), without leaving any residue.

It is also possible to use a self-adhesive conductive film which is stuck to the surface of the identification card at least in the area of the contact surfaces.

It must be pointed out that similar cathode-ray tubes are known in which the cast resin layer is replaced by a thin sheet which is self-adhesive on both sides and whose refraction index is again adapted to that of the supplementary pane and of the viewing screen.

Description Aslan H 200 is a self-adhesive rigid-PVC film for use in reinforcing flexible covers (paperbacks) or for stiffening blueprints, score sheets, placards and maps.

All colours are silk-printed either on the back of the film (thus the print is protected from scratching or damage), or on the front side of self-adhesive PVC films.