Übersetzung für "Scharfe ecken" in Englisch

I'm afraid over the years it's developed some rough edges.

Including they will be easy to install on the most dangerous and sharp corners.

This avoids sharp corners between the webs 75 and a core 76 .

Sharp corners should not be found in the make-up.

There are no sharp edges and corners.

The dunk cardboard flaps have sharp corners and are cut out in the shape of the hiding place.

Any sharp edges or points?

Here too it's the case that sharp edges or points could tear the canvas.

They can have a random shape, but it is advantageous to avoid sharp corners.

The radial grooves are arranged and dimensioned in such a way that sharp edges and corners are created.

Sharp corners and the use of blades, swords, axes, and other weapons portray aggression.

The chamber should therefore be designed as smoothly as possible and without any sharp corners or fittings.

Moreover, this LED strip is extremely flexible and very narrow corners can be made with it.

Accordingly, all edge regions of the hose clamp are rounded so that sharp edges and corners are avoided.

Please keep it away from child for its a little sharp edges and corners.

Prevention of mechanical injuries There are almost no sharp edges and corners in Elabo equipment.

It is made according to the rules of good practice without sharp corners or protruding parts.

The adjustable sleeve is shrouding the thread over its adjustable length and sharp edges and corners have been to a large extent avoided.

Diamond particles are very pointy and sharp and go quite deep into the metal.

Moreover, this LED-strip is extremely flexible and very narrow corners can be made with it.

Blade width: 3 mm (battle-ready) (if sharp corners are blunted)

This means the seals require sharp corners and a perfect fit to ensure long lifecycles.

In the area in which the person operating the coupling has to stand, there shall not be any points of possible danger such as sharp edges, corners, etc. inherent in the design unless these are protected so that injury is unlikely.

The clamping arms 42a, 42b are directed upwards away from the deepest points of the indentations 34a, 34b from the bottom 33 of the base part 32 and transversely toward the outside (FIG. 2) and at their narrow sides 43a, 43b they have sharp edges forming corners.

Moreover, since the mirrors or reflecting layers will enable light conduction around sharp corners, the number of possible spatial shapes for the light concentrator are increased.