Translation of "Geringerer verschleiß" in English

There is therefore likely to be less wear in the downstream waste heat system.

This ensures a higher energy density, lower wear and pressure losses in the line or pipe system.

The result is a stable injection and a lower wear of the nozzle.

This means lower wear and lower follow-up costs.

This enables reduced wear, increased traction and improved passenger comfort.

Significantly lower tool wear reduces operating costs.

Thus a lower wear on the bearings is achieved.

Less wear also results in a reduction in maintenance costs.

Thereby also less wear both of the perforated disc and also of the cutters occurs.

In addition, a lower degree of wear of the contact point over the lifespan can be enabled.

This implies a reduction in wear as opposed to point contact.

Still further, the individual bar cutting blade of the invention is exposed to materially reduced wear.

On the other hand, lower wear of the connecting joint results too.

Smaller wear by temperature-controlled fans - turns only with the necessary speed.

Titanium nitride coated blades, thus higher cutting speed, less wear and longer life,

T his leads to lower wear and tear and thus lower leakages and longer service lives of the radial seals.

This results in less wear on the piezoelectric actuator and thus a longer service life of the hydraulic stroke stop.

In addition to ensuring improved hydrodynamic running characteristics, on the one hand it will be possible to achieve less wear; on the other, the slightest possible leakage particularly at the gap, is achieved by the deliberate total deformation.

Due to the surface contact during the whole clamping process, there is a lower contact pressure and hence also less wear between the cooperating surfaces.

In the case of extruders with a smooth barrel, such wear, which in absolute terms is nevertheless somewhat less, preferentially appears at the beginning of the transition or compression zone.

The wear is also lower because the wear rises superproportionally with the temperature and, when the temperature is rendered uniform or reduced, a reduction of the wear is achieved.

In comparison to metallic materials, ceramics have multiple advantages, such as low wear because of the high hardness and high chemical stability; high dimensional stability in a wide temperature range; and arbitrary availability of raw materials.

However, this not only produces an improved sealing effect, but also less wear of the seal ring, as it is not constantly being pushed radially inwards against the piston rod by the gas pressure in the casing cut-out.

The transmission of force from the articulated head to the guide lever is effected by means of linear contact within the cross bearing, rather than point contact, as, for example, in the spherical head, so that, firstly, less wear occurs and, secondly, a greater load is possible;

This causes less wear-and-tear to the material and coupling, resulting in a longer lifetime for the tool and accessories.

The EDS combines advantages such as energy savings, reduced brake and tire wear, extremely high tractive effort and simple operability in a perfectly matched system.

The rotatable sliding block 24 with a quadratic cross-section permits full-surface contact with the sliding surface 26, so that reduced wear and tear results from the full-surface contact.

This technical approach is reported to provide more energy-efficient drying, reduced wear in washed garments and less need for monitoring.

In addition to noise reduction and CO2 neutrality, the strengths of the electric vehicles include also lower wear and tear and maintenance – thanks to the recuperation by the electric drive, i.e. energy recovery during braking, which means the eTruck delays without the use of mechanical brakes and accordingly without braking abrasion.

Pads with the Brembo Racing Z04 compound, used in the World Superbike and Supersport Championships and now available for street bike applications. The Brembo high performance brake pad range was developed exclusively for racing and designed to offer unparalleled performance in the most demanding race conditions: with greater braking control, greater system stability, increased braking power, outstanding resistance to high temperatures and reduced wear.