Übersetzung für "Extruded polystyrene foam" in Deutsch

The board or film of a foamed organic polymer is preferentially made of extruded polystyrene foam.

Let us consider the balcony floor with insulationusing extruded polystyrene foam.

Extruded polystyrene foam, polyvinyl chloride foam and semirigid polyurethane foam may also be used, as may in particular a resilient melamine/formaldehyde foam as described in German Patent Application No. P 29 15 457, or a resilient urea/formaldehyde foam.

So far, 1,2,5,6,9,10-hexabromocyclododecane (HBCD) has been widely used as a flame retardant in extruded polystyrene foam (XPS) in the construction and insulation sector, but it was as SVHC (substance of very high concern) banned from manufacturing and application in May 2013.

3D-Bloc light is an extremely light polystyrene extruded foam which is perfect for the basic set-up of clay models.

For decades, RAVATHERM XPS extruded polystyrene foam thermal insulation has been successfully applied for the various purpose thermal insulation of roads, railway tracks, airport runways, and skating rinks, and for other structures under the ground level that is exposed to the danger of frost, primarily in the Scandinavian countries and in Russia.

Insulating polymers, such as polyurethane foam,Pressed or extruded polystyrene foam features an excellent combination of low bulk density with high thermal protection properties.

Most often used for these purposes, extruded polystyrene foam, which even in a humid environment having a high thermal insulation characteristics.

Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)

In specific advantageous embodiments according to the disclosure the foam may in particular contain a material selected from the group consisting of polyethylene (PE), polypropylene (PP), polystyrene, in particular such as extruded polystyrene hard foam (X-PS), thermoplastic elastomer (TPE) and/or mixtures thereof.

Such vacuum insulation panels invariably consist of a thermally insulating core material, for example of pressed or loose fumed silica, precipitated silica, open-cell rigid polyurethane (PU) foam, open-cell extruded polystyrene foam, silica gels, glass fibers, beds of loose polymer particles, pressed regrind from rigid or semi-rigid PU foam, perlite packed into a gastight foil, evacuated and sealed in airtight.

Drop tests with a float glass sheet, packaged using a roof-batten as reinforcing material encompassed by a yielding material comprising an extruded polystyrene foam, have been performed without causing damage to the glass-sheet.

When manufacturing composite thermal insulating systems which have been known for a long time and are disclosed, for example, in DE 32 02 960, insulating boards, particularly of extruded hard polystyrene foam, are placed on brickwork using an adhesive or filler material.

Owing to their closed-cell structure resulting from the manufacturing technology, the STYROFOAMTM XPS extruded polystyrene foam plates reserve their high thermal insulation values even in the presence of permanent presence of moisture (soil vapors/moisture, groundwater or stratum water) and under intensive mechanical load.

The system consists of a concrete cistern, an XPS-based insulating material (extruded polystyrene hard foam) and a film lining for absorbing the storage tank water.

Owing to their closed-cell structure resulting from the manufacturing technology, the STYROFOAMTM extruded polystyrene foam plates reserve their high thermal insulation values even in the presence of permanent presence of moisture (soil vapors/moisture, groundwater or stratum water) and under intensive mechanical load.

This arrangement provides for uniform floor load on the frame - as teploizolyanta in this case can use not only the extruded polystyrene, foam and conventional.

Among the safety of thermal insulation materials can be recommended mineral wool slabs "Penoplex" extruded polystyrene foam, felt.

For decades, STYROFOAMTM XPS extruded polystyrene foam thermal insulation has been successfully applied for the various purpose thermal insulation of roads, railway tracks, airport runways, and skating rinks, and for other structures under the ground level that is exposed to the danger of frost, primarily in the Scandinavian countries and in Russia.

Composite panels consisting of a PVC compact panel with a thickness of 2,0mm and a core of extruded polystyrene foam (XPS) and polyurethane foam (PUR).

Such sheets comprise extruded rigid polystyrene foam or particle foam, and the processes for the production of such sheets or films and of the materials themselves are known from the literature references cited in EP-A 0 036 156, which is hereby incorporated by reference in its entirety.

Polystyrene extruder foam or extruded polystyrene hard foam (XPS) is produced in a continuous extrusion process: blowing agent-free polystyrene granules are melted in an extruder and with the addition of a blowing agent are dispensed continuously from a wide slit die.

Extruded polystyrene foams have become very important on the market for insulating materials.

The foam was then fed with the aid of the take-off means (4) through a guide apparatus (3) connected to the extruder, a foamed polystyrene sheet having a cross-sectional area of 500×70 mm being formed.

The length of the cooling mandrel 22 is so selected that the temperature of the extruded foamed polystyrene film is sufficiently low upon leaving the cooling mandrel 22 to be able to effect further working of the film.

From the above description, it is clear that, in addition to the surprising advantages in the manufacture of the extruded foamed polystyrene film, furthermore only means which are very advantageous from environmental standpoints are employed.

The extruded foamed polystyrene film can be worked without intermediate storage into label tubes, no problems with respect to printability resulting.

Preferably, the thermal insulation body is manufactured from synthetic organic insulation materials, in particular polystyrene hard foam, polystyrene particle foam, polystyrene extruder foam, polyurethane hard foam and the like, or from synthetic inorganic insulation materials, in particular mineral wool, mineral foam, foam glass and the like.

As energy efficiency becomes more and more important in the construction sector, demand for blowing agents in the foaming of plastics such as polyurethane (PUR) and extruded polystyrene foams (XPS), used for building insulation, increases.