Übersetzung für "Error ratio" in Deutsch

All other possibilities show a more or less high error ratio.

The error ratio is minimised and operation is very easy.

The unique Smart-Tripwire technology and self-learning components substantially reduce the error ratio.

The high accuracy and reliability of our instruments guarantee the lowest possible error ratio.

This is known as Ratio Error.

The bookings are passed on internally to billing, which also reduces the error ratio.

When an amplitude error exists, the ratio of pulse duration I to pulse pause II deviates from 1, while the ratio from pulse pause IV to pulse duration V is still 1:1.

The word "secure" is defined herein as a decision that has an accuracy of at least 97%, preferably substantially higher and even absolute accuracy, with a correspondingly low statistical error ratio.

In a radio relay system having space diversity reception, the signals received via the main and diversity antennas of the radio link should, insofar as possible, be combined in the receiver such that the bit error ratio (BER) of the demodulated digital signal becomes optimally low and the number of outages (with BER>10-3) of the received signal is thereby simultaneously minimized.

Standard current transformers are normally calibrated to a fixed resistance (usually to the input resistance of the measuring bridge), so that together with the high quality active section an extremely high accuracy can be achieved, allowing in many cases the ratio error of the standard current transformer to be regarded as negligible during measurements.

Because of the error ratio measuring bubbles before the DBT the reduction rate is lower in the clinical environment.

The SSD controller's ability to correct these bit errors can be interpreted by the Uncorrectable Bit Error Ratio (UBER), "a metric for data corruption rate equal to the number of data errors per bit read after applying any specified error-correction method".

Every stage of the production process is monitored and controlled by computer programs in order to aim the minimum error ratio.

Here, the correction step is based on the knowledge that, in the absence of a counting error, the ratio V must always be an integer.

The relative magnitude of the corner load error, i.e. the ratio between the error of the indicated weight and the amount of the test weight being used corresponds approximately to the relative geometric deviation by which the error is caused.

The relative magnitude of the corner load error, i.e. the ratio between the error of the weight and the amount of the test weight being used corresponds approximately to the relative geometric deviation by which the error is caused.

Because of the suppression of the carrier signal at up to 40 dB, the range of the RFID system may be increased by more than eightfold, or the bit error ratio be improved at a constant distance.

The improvement of the carrier suppression results in a proportional enhancement of the system dynamics and, consequently, to an increased reach and/or an improved bit error ratio.

Hereby the system dynamics is increased by the hereby generated suppression of the carrier signal, which results in an increase of the reach or in an improvement of the bit error ratio at the same distance.