Übersetzung für "Oberste lage" in Englisch

Joints where the top sheeting includes joints these shall be as follows:

The topmost layer of the insulation sheath 2 is formed by the mica tape 3.

The layer specified as top layer is output as TOP.

There is no intermediate layer on the upper layer within the load unit.

The top sheet is made of corn fibers.

Humus is the top layer of the soil and is very fertile.

Often the top layer of the fixed bed 4 a is formed as an inert dust-catching layer.

The topmost layer is thereby designed as a cover.

This adhesive tape is fastened beneath the uppermost ply of the new roll.

This adhesive tape is also adhered beneath the uppermost ply.

The next cartridge now assumes the uppermost position in the magazine 14 .

The ar_setplantoplay function defines the Autorouter and/or layout element top layer setting.

Top Layer, All Layers and Middle Layers are special signal layers.

The top layer is preferably always seamed because it supports the paper pulp.

Thus, a selective shaping of the hair regrowth, which forms the uppermost layer of the roller, is thereby possible.

Alternatively, for instance, the plank/board for the uppermost layer may be hardened by silicification.

In this case, a grate of rods 58 is placed on the uppermost layer of the filler-body blocks 40.

The lay_toplayname function returns the top signal layer name defined in the BAE setup file.

The actuating cylinders are then operated to raise the shell to its uppermost position, whereafter the cooked product is laterally removed through the gap between the sieve plate 46 associated with the lower piston 4' and the lower rim of the shell 1.

In general, the top or paper-supporting layer consists of a fabric with a greater number of warp and filling threads per centimeter and of finer threads.

Depending on the end use it may be sufficient to seam only two layers, e.g. the top and bottom layers.

The reducing permanent shaping substance penetrates into the uppermost layer of the rolled hair and immediately forms a separating layer by reaction with the pretreatment layer which prevents a further penetration of the permanent shaping agent in deeper layers of the rolled hair.

The support 11 is also lowerable stepwise from the fully elevated position, each step corresponding to the height of a layer of the stack 12, so that during the loading operation the uppermost layer of the stack 12 on to which the articles lying on the conveying arms 10 of the conveying fork 9 are stripped off is arranged at the same height.

In many cases the first colour identification process results in that the colour determined for the core envisaged for the uppermost position, is not yet located there but in one of the two lower core positions.

As soon as the clamping tongs 10 has stopped in the alignment station and the free end of cable 14 is located essentially flush with the rotating axis, whilst the two drive shafts 64 take up their uppermost position in compliance with FIG.

A heating element and a sensor element, provided as a further thin-film layer as uppermost layer on the substrate 1 and thus in closest possible proximity of the ink in the ink volume space 9 is furnished for the heating of the ink to a value, where the viscosity of the ink is optimal for the ejection process.

An apparatus according to claim 4, in which each of said receiving containers is equipped with a holding device for holding in position the uppermost layer of cigarettes in said filled trays.

The actuating cylinders are then operated to raise the shell to its uppermost position, whereafter the cooked product is laterally removed through the gap between the sieve plate 46 associated with the lower piston 4' and the lower rim of the shell 1.