Übersetzung für "Korrekt einstellen" in Englisch

Correctly set floor heating / boiler system (depending outside temperature)

On all other computers, you just have to set the path to the license file correctly.

How can I adjust time settings of my MSR Data logger correctly?

With this plugin you can easily set the correct logo sizes in Shopware Backend.

In the ideal case, however, the alignment produced in advance by an alignment unit would be correctly adjusted again after the total heating of the substrates.

However, in detent connections of this type, an incorrectly locked state can occur in which the detent elements are in fact already in contact with each other, but the detent hook has not yet engaged behind the spring wire correctly.

The remaining fields on the register card contain technical data, which are needed to tune the channel correctly.

If you have any doubts regarding your ability to make the correct changes, then we advise you to ask an expert for help!

You choose whether you just want to wax, have the binding set correctly or just want to claim the small service for CHF 43.-.

If you are not able to adjust the volume correctly in the recording window, you should make sure that your hardware is set up properly.

Adjusting the spring tention correctly and having done some minimal practice is essential to avoid the unconfortable and dangerous situations.

Your doctor will tell you how to choose the correct dose.

Verify with the system administrator if this setting is correct.

The file iodbc.cfg contains the correct Globus settings.

Here we needed several attempts until the correct setting was found.

Verify that your DNS settings are correct.

Make sure the following settings are correct:

A 100% zoom facilitates to properly evaluate and set the parameters of these tools.

Take a picture to make sure the BIOS settings are correct.

The integrated monitoring system allows correct setting of the individual temperature control circuits.

Please check the Work Schedule Record to see if the settings were adjusted correctly.

Problems with correct settings of disclaimers may occur.

In this case, the possibility should be combined with correct setting of the inlet-side mass flow.

Hence, it is very important to set the adaptation speed for the feedback path correctly.

Thus, a correct pin length can be adjusted in conformity with the vehicle conditions.

All position lights are visible in the rearview mirror when the rearview mirror is adjusted correctly.

In addition, check that the appliance settings are correct.

By clicking Test, Across tests to ascertain whether the WAN settings are correct.

Check whether the telephone has adopted the settings correctly:

Click the Export button when all the settings are correct.

Dialogue boxes and menus display properly using regional settings

Three long flashes indicate a correct setting.

To confirm that your settings are correct or to make a change:

At this point, you need to check the settings below are correct.