Übersetzung für "Sharp tool" in Deutsch

The uncoated mesh cross-members are then cut through with a sharp cutting tool.

An optimally sharp tool is thus ensured for each procedure performed on bones.

The beneficial effects will have any distracting from the sharp turning tool.

The shape of the letter is shaped abrasive sharp tool.

Good maintenance habit can keep the tool sharp.

They then pry open the mouth with a sharp metal tool.

Use a strong sharp tool to open the husk.

As a result, even sharp objects from tool steel cease to be a threat.

They tried to shove the sharp tool back into her mouth.

A sharp-edges, heated tool 69 is applied to the side of the outer layer 67.

A sharp-edged, heated tool 69 is applied to the side of the outer layer 67.

By pressing the sharp-edged punching tool into the board, the paper fibres are cleanly separated from each other.

Power BI is a sharp tool for customer services teams to link product or service performance with customer behavior.

As fragile as the SECUMAX VISICUT may appear, it is a really sharp cutting tool.

On the other hand, manual manipulation of the tool holder in the reverse position is dangerous because a user can readily slip when grasping the holder and be injured on a sharp cutting tool.

It is therefore advantageous to drill closed-end bores by means of a sharp tool into the combined choke and bearing plate, over the surface of which the air can enter the bearing gap.

But one still has to be aware of the fact that it is an extremely sharp tool and should take care never to touch neither the lower knife nor the cutting roll.

You've Sharp Edge tool to draw sharp edge model and Soft Edge to draw soft edge models.

In this case, very sharp tool edges must be provided and the coating may not result in a strong enlargement of the tool edge radius, as is the case for thick CVD layers and uniform layer deposition.

These geometries result in a sharp-edged tool engagement while at the same time the risk of edge breakage is minimized and, in the case of cemented carbide, an optimal resharpening effect takes place.

Since the advancing devices act, for the purpose of advancing, on a receptacle to be compacted and in the process pierce the receptacle with a spike or some other piercing tool, sharp edges on the compacted receptacle can be avoided or at least reduced, resulting in an advantageous shape of the compacted receptacle which allows advantageous bulk handling and layering without the compacted receptacles catching on one another.

If this bag is pierced through by a sharp-edged cutting tool at the point of contact with the working agent vapour channel, the regulator organ will also open.