Übersetzung für "Deposition velocity" in Deutsch

Thereafter, a delay or retardation period is traversed until the desired deposition velocity is reached.

As was already mentioned in the beginning, a high deposition velocity during galvanization requires a high relative movement between the surface to be coated and the electrolytes, in order to prevent a depletion of metal ions in the cathode film.

By means of a defined electrolyte supply via flow-on channels and flow-off channels, a very much less turbulent flow is attained so that even metals of the Pt group can be deposited with a relatively high deposition velocity.

The preformed rod can be deposited in the magazine in still more orderly manner if it is introduced into the magazine in such a way that the deposition region in the magazine corresponds to a theoretically calculated instantaneously valid point of a spiral in the magazine, the calculation parameters for the spirals consisting inter alia of the rod thickness, the minimum and maximum diameters of the magazine and the deposition velocity.

If a palladium membrane is selected, it can be produced, for example, by chemical gas phase deposition, electrochemical deposition, high-velocity flame spraying or physical gas phase deposition, what is called electron beam vaporization or what is called sputtering.

Note that the sedimentation and deposition velocity specified in the NOSTANDARD options is used for all substances that are included in the dispersion calculation.

Example for the output of the concentration for diameter class 3: os "NOSTANDARD;Vs=0.04;Vd=0.05" xx 100Note that the sedimentation and deposition velocity specified in the NOSTANDARD options is used for all substances that are included in the dispersion calculation.

If one is interested in the concentration of one of the components "3", "4", and "u", the dispersion calculation can be carried out with the gaseous component "xx" and explicit setting of the sedimentation and deposition velocity using NOSTANDARD options.

If a data matrix is applied for the deposition velocities of a substance, the usual deposition velocity in file substances.def for this substance should be set to 0.

The deposition files (e.g. pm-depa.dmna) contain the sum over all components.If one is interested in the concentration of one of the components "3", "4", and "u", the dispersion calculation can be carried out with the gaseous component "xx" and explicit setting of the sedimentation and deposition velocity using NOSTANDARD options.

So that the galvanization process for a predetermined layer thickness takes as little time as possible, high flow velocities of the electrolytes and high current densities are aimed for, since only in this manner can high deposition velocities be attained.

It has further been found that in the case of an almost laminar flow on the surface to be treated, significantly higher current densities are allowable that in the case of turbulent flows, so that with this, significantly higher deposition velocities can be attained without fissure formation of the layers even at rather high temperatures.

Particularly high deposition velocities can be attained in that the flow-on and flow-off angle of the channels with respect to the surface to be treated amounts to approximately 0°.

This is to serve the purpose of not increasing the number of folds to reduce the depositing velocity, but rather of placing the folds in closer juxtaposition whereby automatically an only low falling speed of the strand into the can is achieved.

It has proved that the cell aggregates having diameters of between 100 ?m and 1,000 ?m deposit at a velocity faster than 1 cm/min, while the smaller cell aggregates deposit at a velocity of less than 1 cm/min.

The type of stones at Popigai are known as "impact diamonds," which theoretically result when something like a meteor plows into a graphite deposit at high velocity.