Übersetzung für "Unlegierten stahl" in Englisch

Chrome steel is not soldered to unalloyed steel when copper solder is used.

In this example, arc electrodes were used which were made of unalloyed, low-carbon steel.

We supply special washers made of case hardening, heat-treatable, spring, unalloyed and stainless steel.

Corrosion studies to date have indicated that the behaviour of the unalloyed steel is suitable in this respect.

Customers can choose either mild or stainless steel/aluminum consumable starter kits.

Liquid elementary chlorine does not corrode unalloyed steel.

Stainless steel, aluminum, and mild steel even if rusted or painted

For the production of self-tapping screws for metal used high-carbon steel with oxidized finish.

As described in Example 3, the erosion rates for plain steel (ST37) of solutions of docosyltrimethylammonium 3-hydroxy-2-naphthoate in deionized water at 100° or 120° C. were investigated.

As described in Example 1, the erosion rates for plain steel (ST37) of solutions of C16 TA-BHNA in 0.1 N hydrochloric acid at 65° C. were investigated.

The test coupons are removed and the mild steel, brass and copper coupons are cleaned as before except that the acid is inhibited with 1% hexamine, rinsed, dried and reweighed.

The method defined in claim 1, wherein the closure platelet of said providing step is comprised of a strain-hardened unalloyed steel or low-alloyed steel, has an elongate shape, has a planar side surface and a convex side surface, has a planar end surface which forms an obtuse angle with the planar side surface, and includes at least two pyramid-shaped welding projections located on the convex side surface.

The closure platelet may consist of an unalloyed or low-alloyed steel which is strain-hardened during its production and has the same degree of hardness as the mold material itself.

It consists of an unalloyed or low-alloyed steel and also obtains its shape by cold working. The steel thus attains a high degree of hardness, this hardness with not being impaired by the projection-welding operation, and being equal to the hardness and wear resistance of the mold walls.

The CSM has studied four steels, one being a carbon steel, two CR-Mo steels and one a stainless steel (AISI 316).

Due to this and to the intereffect of dissolved chromium with dissolved carbon, the carbon activity is reduced and consequently carbon is no longer able to displace phosphorus from the grain boundaries as in the unalloyed steel.

Comparison steel A is a known unalloyed steel, while the comparison steels B and C are known alloyed steels having differing contents of chromium and/or titanium.

Here curves A and B are characteristic of unalloyed steel, C of electrolytic iron, and D of duplex steel (2-phase steel).

Electrochemical storage cell according to claim 1, wherein the outer housing element is made of unalloyed steel.

As part of Hypertherm's SureCut technology, our patented True Hole® cutting technology for mild steel produces significantly better hole quality than what has been previously possible using plasma.

They weld with consumable electrodes and use Ferroline C18 (18 per cent CO2, 82 per cent argon) as a shielding gas when working with plain steel.

DIN 338, right hand cut, type N, precision ground, self colour. Tip angle 135 deg., cross-ground to DIN 1412 C, self centering, cylindrical, industrial quality, for eg.steel and alloyed steel, cast steel, die castings, sintered steel, non-ferrous metals and hard plastics.

While in the range from the unalloyed steel up to the perlite 5 there may still be a-ferrite crystals present, the range between perlite 5 and ledeburite 8 is distinguished by the fact that, depending on the temperature, austenite crystals may still be present here, while in the hypereutectoid range between ledeburite 8 and pure cementite 10 no pure iron crystals exist any longer, but exclusively a granular structure of primary cementite and ledeburite.

If the reactor consists of the unalloyed carbon steel normally used in the high-temperature reaction, the temperature of the reactor wall should be kept below 200° C. by means of a cooling medium.

Brake discs made from a cast iron material, for example grey cast iron having a carbon content of 3.7-4.0%, have an oxidation-resistant and wear-resistant, metallic, non-ceramic injection moulded coating made from a harder metal on at least one of the axial friction surfaces, for example a non-alloyed or alloyed steel which has carbide and oxide.

The steel product is produced from an unalloyed steel with a carbon content of 0.03-0.25 wt % and has a manganese content of 0.2-0.6 wt % and a silicon content of less than 0.011 wt %.

The steel from which the steel sheet in accordance with the invention is made can be a cold-rolled, unalloyed or low-alloy steel.

Thus, a corrosion-resistant material is preferably selected for the profiled body 04, such as, for example, an alloyed corrosion-proof steel or an aluminum bronze, while the barrel 02 can, for example, consist of unalloyed C22 steel, and therefore can consist of a material which is more susceptible to corrosion.

Advantageously, a corrosion-proof protective layer 33 is applied to the shell face 07 of the barrel 02 which barrel 02 can be, for example, made of an inexpensive unalloyed C22 steel, wherein the protective layer 33 can be made of, for example, a coating on the basis of nickel or iron-austenite-cobalt, which coating can be applied by a high-speed flame-spraying method, or a coating of titanium oxide, which can be applied by a flame-spraying method.

The base body 28, together with its surface 29, can be made of a relatively corrosion-prone, low-cost material, such as, for example, an unalloyed C22 steel.