Übersetzung für "Working torque" in Deutsch

Limited by the limits of motor working limit, its torque is finite and inflexible.

The working torque during the drilling is transmitted by the interfitting connection of the two pipe ends.

An automatic resetting to a lower working torque thus advantageously increases user-friendliness.

By choosing the incorrect drive (incorrect in size and type) there will be three possible operating points with the necessary working torque.

The torque exerted by the cage on the guide arm by way of the second guide rod, however, can reach an inadmissibly high value relative to that of the torque working against it on the platform side.

When the proper drawing mandrel is inserted and has its torque working surface aligned with the torque working surface of the output element, the slide can be moved axially back to its original position.

Usually, the preselected limit torque is a compromise between the lowest possible torque load on the insert bit, the power tool, and/or a user and the highest possible working torque for using large tool diameters of the insert bit.

Usually, even with the use of very powerful power tools, a very high working torque is only required in relatively few specific applications.

The standard to which all calibrated ergometers are finally traced back is now operated at PTB by the Working Group "Torque Realization".

At least one, preferably several variables characterizing the mechanical load of one or more working assemblies, such as the speed, torque, working pressure and/or the like of these working assemblies, are taken into account as operating parameters of the harvesting machine.

For this purpose, the shaft must be exposed to torsional stresses, that is to say the magneto-elastic torque sensor must be arranged along the shaft between a driving torque and the reaction torque working in opposition to the latter.

Since torsion, the magnitude of which depends on the torque, is produced in a rotating shaft on account of the driving torque and the reaction torque working in opposition thereto, the torque causing the torsion can be determined from the recorded torsion.

This occurs in that the blades or sliders available in the displacement pump are locked by the locking mechanism in an idle position, so that the pump is no longer working and the torque and power input of the pump are reduced, except for churning losses and bearing friction losses.

If the required working speed and torque for the application have already been determined the optimal drive can be designed.

Given that the working torque is less than the nominal torque, the motor runs at close to the no load torque, with 450 rpm, under low demand.

Upper motor stands still at a fixed position and is working as a torque transducer while the lower motor is used to deform the sample