Übersetzung für "Table look-up" in Deutsch

The information of the residual value RW is processed, for example by means of a calculation process or, in accordance with the exemplary embodiment, the correction value KW obtained by applying the residual value RW as an address to the table look-up memory TAB of; this correction value KW has a word length of 16 bits.

The residual value RW addresses a table look-up memory TAB and a corresponding correction value KW is selected therefrom.

Within the framework of an iteration process, a correction factor K is obtained for the determined quotient Q by means of comparison with calibrated values stored in a value table (look-up table).

With the “table look-up method,” all minimum-fuel thruster arrangements are computed for the unit forces and the unit moments with respect to one axis of the body coordinate system of the spacecraft (solving of the linear optimization problem) and are stored in a table.

The improved and expanded “table look-up” methods are methods for setting up a look-up table containing entries for additionally introduced axes.

Other methods are based on the evaluating and improving the results determined with the “table look-up method.”

In a preferred embodiment of a medical therapy apparatus of that kind, an addressing signal can be produced for a storage means or memory by means of the at least one indicator signal, which addressing signal in the manner of an addressable table (look-up table) contains in respective various storage regions which can be selected by the addressing signal in dependence on the indicator signal items of therapy information which can be read out as output signals and which are associated with the respective indicator signal.

Within the framework of an iteration method, a correction factor K for the quotient Q determined is obtained by means of comparison with calibrated values stored in a value table (look-up table).

In another embodiment, the temperature-compensated measured signal S is derived from the alternating signal component PAC and the direct signal component PDC of the intensity-normalized signal P by means of a pre-established value table (look-up-table) or calibrating function.

The measured signal M is then determined from the signals PA and PB, preferably by comparison with a previously determined value table (look-up table) of stored calibrated values.

In order to initiate the second phase, the first safety function, the distance, the relative velocity, the steering angle and the velocity are evaluated for a second safety function, and the last two variables are evaluated using a stored table (“Look-up Table”, LuT).

As already explained in Japanese Patent Disclosure JP 57-175211 A, for determining the absolute position from the scanned code words—also called decoding—a decoding table (look-up table) is used, in which each code word is assigned one position.

When controlling corresponding methods, the closed mathematical relationships or else the empirical values are provided from graphs or tables, wherein “table-readout methods” or “table-look-up methods” may also be considered.

The reduced desired speeds n 1desired, red, n 2desired, red, n 3desired red, n 4desired can be deposited for each compressor V 1, V 2, V 3, V 4, especially in the form of a table (look-up table).

The request correction torque k can be determined as a function of the current electric motor request torque MEm_setp from a table (look-up table) which is stored, for example, in the closed-loop control function or the closed-loop controller or in some other electronic control unit.

The respective floor-specific derivative value to be used can be selected by means of a so-called look-up table 40 (look-up table, LUT), as exemplarily shown in the illustration on FIG. 5 .

The reduced desired speeds n 1, n 2, n 3, n 4 for each compressor V 1, V 2, V 3, V 4 can, in particular, be recorded in a table (look-up table).

It is however also possible for the correlation to be stored in the form of a table (a look-up table) in which the intermediate variables and variables for determination are mapped onto one another.

Means 100 is preferably also provided with an interpolation means 402 in order to keep the table size of look-up table 400 within certain limits, on the one hand, and to generate, on the other hand, an interpolated current correction factor at an output 408 also for current positions of a virtual source which are fed to the interpolation means via an input 404, at least using one or several adjacent position/correction-factor value pairs which are stored in the look-up table and are fed to the interpolation means 402 via an input 406 .

If the current position information associated with the audio track of the virtual source does not precisely match a piece of position information to be found in the look-up table, the look-up table may also have a simple round-down/round-up function associated with it so as to take the nearest support value stored in the table rather than the current support value.

The RGB document data can thereby be converted directly into the CMYK space with a corresponding conversion table (look-up table).

This functionality can then be stored in a memory table, for example, so that a suitable switching delay for a given overall erosion can be established simply by addressing the memory table (look up).

The spread itself is produced at the same time as the data modulation and the power weighting in a table-look-up method, the hardware 11 calculating an address from the physical data bits EI, DI, DQ and EQ and the current bits of the spread sequence SI and SQ, under which address the voltage values for the I component and the Q component are stored.