Übersetzung für "Static switch" in Deutsch

After initiation, main filter capacitor 38 is switched on in parallel by means of static switch 42 .

Preferably, the static switch is a low-noise junction-field effect-transistor.

The static transfer switch (STS) plays a key role for power redundant configurations for high reliability.

The static switch contact 3 associated with the moving switch contact 2 is connected to an upper connecting bar 12 .

It is especially advantageous when immediately adjacent to the electroporation-electrode a switching component, in particular a static switch, is arranged with which the electroporation electrode can be connected to the electroporation voltage source.

Multiplexers 14 and 15 not only switch raster video signal sources 10 but also switch static signal sources for black and white levels 16, 17, and in addition, through an interface 19, a switch raster data channel to which an external graphic device is connected, to modulator switch 2, if and when multiplexers 14, 15 have been adjusted, by preselection control logic 13, to respective preselection positions.

The duration of the turn-on and turn-off time for the respective static switch is given by a pulse-width modulator (PWM) in figure 13.

Such uninterrupted power supply may include a central electronic switching device with a control unit or a static transfer switch with a control unit.

The ESS enables extremely high energy efficiency and reliability under normal operating conditions where the load is fed through a static bypass switch.

Developed industry's first 5000A static switch for increased current capacity to data centers, which uses leading edge integrated heatpipe technology to extend traditional 4000A capability to 5000A.

The power is fed through the static bypass switch, and the UPS is ready to switch to double-conversion mode in less than two milliseconds, in the event of exceeding pre-set input limits.

By its questions, the Supremo Tribunal Administrativo is asking essentially whether the Nomenclature, as well as tariff subheadings 84.53.B, 85.01.B.II and 85.04.B.I, are to be construed as meaning that an electrical apparatus which constitutes an 'uninterruptible power supply' consisting, on the one hand, of a cabinet containing a rectifier/charger, an inverter and a static bypass switch, and, on the other, of a cabinet containing a sealed lead-acid accumulator battery is to be classified under one or several of those tariff subheadings of the Nomenclature.

Accordingly, conventional (nematic) liquid crystals can be used to produce slow (static) switching networks.

The switching frequency of the static switches is given by the so-called pulse frequency fp (synchronous pulse method).

In a similar manner the static switching contact element 7 is secured in a locking recess 9 in the frame 3 by means of a locking element (tongue) 66.

Also the static switching contact element 7 is biased into its restposition preferably against an abutment means preferably in the form of a pin 11.

It differs in that here the power supply from the primary network via the static switches 28 and the chokes 26 is connected to the secondary winding 24 of the converter machine 25.

Different frequencies are achieved by statically switching the slope inverter pairs in one of the "in-phase" or "anti-phase" modes.

Static switches 18, 20, 22 and 24 are provided in order to effect periodic reversals of polarity.

The time intervals at which each pair of static switches is open and the other pair closed is determined on the basis of the thermal inertia of low-pressure UV irradiation lamp 10, and may be between 0.2 and 5 seconds.

After initiation, the system switches to the steady state, in which each pair of diagonally opposed static switches in the ring arrangement is alternately closed or opened to complete the connection between the low-pressure UV irradiation lamp and the voltage or current source.

The ballast according to claim 7, characterized in that at least one of the static switches that is closable at the same time is configured as a controllable energy source (26, 28).

In a further improvement of the ballast, the switch is configured from four static switches in a ring arrangement that are powered with direct voltage or direct current at two opposing nodes.

This has the disadvantage that such a static switching signal can also occur in the event of a fault and prevents the required switching or, if switching has already taken place, wrongly effect switching back.

By means of the inventive structure of the driver stage, it is now assured in an advantageous manner that in neither of the two possible static switching states of the individual stages of the driver stage does a disadvantageously large power dissipation occur.

Whenever high robustness is a key criterion, like for soft starters or static switches, Infineon offers the pressure contacts as the best solution.

One could easily derive from the static distribution of switching points to protect the pump that every oil tank is manufactured to very specific custom dimensions and the switching points would therefore never be the same.

If, in this case, communication between branch offices and switching node is to be guaranteed for backup as well, the routes to the branch offices must also be configured statically in the switching nodes.