Übersetzung für "Decrementation" in Deutsch

A threshold and a decrementation value are required as parameters.

For an identical clock for all connections, the decrementation clock can also be globally stored.

Taking into account transient errors is limited to incrementation and, possibly, decrementation of an error counter.

If the second test is positive, i.e. as soon as the contents of register R3 are FF, the position of flag 1 is changed again, so that decrementation takes place during the next "timer" program.

When this level is lower during a part of this connection or during a further connection set up by a switching system, then, after a decrementation of the previously-stored value, a new peak value matched to the lower level value is identified.

On the basis of immediate registration of whiter levels and only slow decrementation in a direction towards black, the function of a maximum value memory derives that contains the whitest level of the recent past for every pixel diode.

A counter value of the connection associated counter is decremented by the connection-associated decrementing value at periodic time intervals corresponding to the length of the connection-associated decrementation clock.

In other words, to get from an address XX to an address YY, binary incrementation or decrementation or a logical address branch eliminating redundant count steps, may be used.

As a result thereof, the time interval after which a new input value is transferred into the holding memory during the decrementation is normally so great that the call characteristic is retained.

Further decrementation is thus carried out after reaching the stationary position, that is to say acceleration in the opposite direction is carried out, and incrementation (braking) is subsequently carried out as soon as the destination error has become less than the switching separation BA given by interval KS'.

The point 5' on curve KG3 now lies far above the required braking curve in the decrementation region 2, for which reason an immediate changeover into braking operation is made, which initially leads to a further increase in the target deviation.

On the other hand, the address pointer is decremented as long as the target deviation is greater than the value which is given by the limit curve KSG for one rotation direction--opening of the throttle valve--and by the switching curve KS' for the other rotation direction in (decrementation region 2).

For this purpose, one step angle and associated region parameters are read out per each interval, and at least two regions are thus defined, namely an incrementation region and a decrementation region.

In the case of the invention, these processes take place automatically and result by simple decrementation of the addresses in the angle table.

In the present exemplary embodiment, wherein the momentary counter reading Y always has negative values due to the decrementation by the count value d proceeding from an initial counter reading of Y=0, it is also provided that the momentary counter reading Y is set to the value Y=-K given a sum value of W=Y+K>0.

If this is the case, the address of the angle table is incremented and, if it is not the case, a check is carried out in step S6 to determine whether the destination error is in the decrementation region, that is to say whether it is greater than the sum of the switching separation BA and the correction width BAK of the correction region.

This results in that old reports stored earlier cannot be decoded with stolen devices, as in their case a lower counter value was used and decrementation of the counter is not possible.