Übersetzung für "Buried pipe" in Deutsch

I've struck what seems to be a buried pipe.

Measurements have shown that buried pipe networks encounter creeping which is manifested by the fact that when the initial pressure is set, i.e. the pressure is increased or reduced, in the temperature-stable pipe section, i.e. the pipe section whose temperature is equal to its environment, there will initially develop a pressure which is somewhat higher or lower, respectively, than the initial pressure and which then drops or increases, respectively, with a time constant of about 0.5 to 1 h and then remains constant.

With these measures, so-called creeping observed in practice in buried pipes or pipe networks, which has a falsifying effect on the measurement of pressure changes, is compensated by calculation.

With the process of the invention it is achieved in an advantageous manner that the advanced cutter head, attacking at a face of the old buried or enclosed pipe to be worked or removed is always centered relative to such old pipe, even if unilateral forces act on this cutter head owing to the different thicknesses of the wall of the pipe.

Thus the chill current of air from an underground buried pipe is not warmed up by the exhaust air.

Many buried pipes and conduits are broken.

We have buried these pipes with a layer of cement to protect them.

Greatest thermal efficiency was achieved by injecting the steam through perforated pipes buried below the surface.

Thus the curing of longer piping sections in buildings or buried pipes is possible.

This is peculiarly true for detailed infor mation concerning the existing built forms in urban contexts, for the detailed description of existing buildings or in collecting information related to hidden elements like buried pipes.

With the vacuum system waste water can be transported in pipes buried under ground without additional measures, since in case of a pipe break an alarm is released automatically, all waste water influents into the defective net are immediately and automatically interrupted (pneumatic negative pressure control of the suction valves), no waste water can discharge at the location of fracture (interruption of the waste water supply by saw tooth transfer) and the location of fracture can be quickly and meter-exactly determined by slide and inspection pipes.

Therefore, detecting the position of buried cables and pipes before excavation work can help prevent operator injury, asset damage risks and any subsequent costs.

To simulate a cable as realistically as possible and by simple means, an initial field test carried out in 2005 saw us bury pipes in a sand bed and fill them continuously with hot water.

Bury the pipe will be at least 35 cm, be sure to provide a watering system, it is about the same as in the barrel.

Mainly in the pass-through structure for a variety of aerial cable, pipes, buried and other ways of laying and branch connections.

It is not just those cables and pipes buried in roadways, but the deep basements of skyscrapers that we are addressing.