Übersetzung für "Loose contact" in Deutsch

If loose stools persist, contact your doctor.

In this respect it is preferably a question of a loose contact without a permanent connection.

The base sits in a loose abutment contact with the rear face of the plunger 3 .

If your crown feels loose, contact your dentist?s office.

Different cultures disintegrate, still in loose contact, enabling the spread of technology.

This result leads to slot damage, loose, bad contact and so on.

Too small an angle ?a would, in operation, lead to a gap or loose contact.

We are in loose contact with the author of UAE and there is a good chance that

As a result, the rolls 40 remain in a loose contact with the workpiece during the entire screw-in process.

Core exposure or loose contact is forbidden.

Check whether there is a loose contact on the light bulbs or one of them is defective.

Some northern dialects develop in Northern Europe, still in loose contact.

Order this item and we eliminate the loose contact of the headphone jack in your iPod touch .

At that time, Lingnan was considered as a barbarian land and it had loose contact with the Zhongyuan region, which was the cultural cradle of Chinese culture.

The fragments of ice will come into only loose contact with each other only at this point and only to the extent necessary to convey them.

The pulling loose of the contact bridge is thereby facilitated and accelerated, because the break-away of the contact bridge occurs immediately with the rearward movement of the armature, so that an additional return guide spring can be omitted.

Said throttling strip 9 is in loose contact with the inner circumference of said protective tube 4, so that said protective tube 4 expands while undergoing elastic deformation in the case of a predetermined pressure differential between the inner spaces of said two chambers and permits damping fluid to flow over from one of said chambers into the other.

When the tensile force is applied, no damage is done to the individual string by clamping elements and the individual string can rotate by virtue of the initially loose contact thereof in the claw, before the tensile force is applied.

The partition 3 is made of a single piece of rubber and is provided in the area of the thickened region 8 with small studs 10. When the partition 3 is in the undeformed state, the studs 10 are in loose contact with the supporting bodies 9, which in this area are arranged in a circle.

In addition to the guide portion 68 and the crosspiece 70, the guide piece further comprises a guide pin 84 which has its end face 86 adjacent the side wall 60 in loose contact with the inner face 88 of the side wall 60. Its other end face 90 which extends parallel to the end face 86 is spaced from the end face 76 by a distance a little greater than the wire thickness of the follower spring 53 so that, viewed from the right in FIG. 3, the section 80 of the follower spring is located behind the guide pin 84.

Shortly thereafter, a lateral cam 330, which projects outwards from each spring 320, runs onto a cam guideway 332 along which it is pressed downwards so that the retentive coverings 322 loose contact with the pile.

The valve body 29 is provided with a control member 31 which is axially guided therein. The control member 31 is comprised of a valve shaft 32 and a piston 33 which is in loose contact with the valve shaft 32.

Since the print electrode 18 is positioned in loose contact with layer 12, the presence of liquid thereon reduces frictional forces and thereby enhances printing speed.