Übersetzung für "Label roll" in Deutsch

Thus the operator will have enough time to switch to a new label roll.

The label web 26 is guided from the label roll 22 to the printer device 18 .

In principle, it is also possible that an inwardly wound label roll 9 be used.

What does the batch number on the roll label mean?

The contact transport unit is used to easily change the label roll.

Supplies include a drop-in paper or label roll and a snap-in tri-color ink cartridge.

Label roll, print head and platen roll can be replaced in seconds.

The label roll is visible through a transparent viewing window.

Full or half cut can be selected for the roll label or tag.

This ensures that the correct label roll for the respective order is inserted.

The robust full shell housing with an internal label roll ensures long-lasting functionality and the best protection of the labels.

Furthermore, a holder 20 for a label roll 22 is arranged in the housing 16 .

The situation is different if a label roll 13 which is not completely full is inserted.

The conveying device 3 has a pivoted roller unit 8 for the storage of a label roll 9 .

Then wipe on the station will be activated at the two side flaps of the label to roll on the side of bucket.

The plastic parts must not get caught up into each other on their journey from the label roll to the single-use syringe.

In the film storage, the Sleevematic from Krones prepares for switching to a new label roll.

Another interesting roll was the “Label Rouge – Edamame Roll”.

For adaption to the surface to be provided with a label the applicator roll 10 not only can tilt, it also can yield in parallel direction.

Cardboard labels of the label strip according to the invention can be fed just as the self-adhesive labels of the known label strips by progessive pulling off of the carrier strip from the label feed roll to the printing device of the labelling apparatus and from there to the dispensing position.

The size of the applicator roll is calculated for the profiled rings 33 of the cylindrical jacket to come into contact with the unprinted edges of the label 16 ?, to roll over the edges and to press the label onto the article needing to be marked.

It also extends the applicability in that embossing can be carried out directly on a workpiece but also as so-called label printing from roll to roll or also in rotary sheet-fed presses.

Approximately 160 labels of 40×138 mm are in each case adhered to a strip length of 146 mm on the label roll 5 enclosed in a container 4.

From the label roll 5 the label strip 3 passes through a lower guideway 8 to a reversing guide 10 surrounding a transport roller 9 and from there to an upper guideway 11, which is positioned at an acute angle to the lower guideway.