Übersetzung für "Casting about" in Deutsch

Casting was effected at a casting temperature of about 1050° C. into a chill mold.

With a silicone mold in vacuum casting about 20-25 casts are possible.

What does the Bible say about casting out demons?

At a casting speed of about 80 m/min., this corresponds to a film path of 4 cm.

What can you tell us about casting the main characters of "Haunting Villisca"?

The big casting" and tells about the casting for the big show in New York.

Mr President, amid all the confusion about casting and recasting, this was a very difficult vote for many Members.

Today, some policymakers in Latin America, worried that the same thing could happen to their countries, are casting about for policy tools to prevent it.

While Marcus confirms Harper's story, I've been casting about for clues as to who else might have wanted Ballantine dead, and, failing that, where he acquired his lethal mushrooms.

After the addition of 2.6 ml of a 5% saponin solution and 1 ml of an aqueous 2% mucochloric acid solution, the resulting solution was adjusted to the usual casting viscosity of about 11 mPa.s and applied to the support by the immersion process at 40° C. (casting velocity 5 m/min).

After adding 2.6 ml of 5% saponin solution and 1 ml of 2% aqueous mucochloric acid solution, the mixture was adjusted to a conventional casting viscosity (about 11 mPa.s) and the solution was applied to the layer support by the dip process at 40° C.

Flat membranes of a polyamide, a copolyamide or a mixture of polyamides, suitable for ultrafiltration and comprising an ultrafiltration skin and a porous backing layer, the pore size in said backing layer increasing with distance from said ultrafiltration skin, produced by dissolving the polyamide in at least 75% concentration formic acid, applying said casting solution, containing about 12-22% by weight polyamide and 1-7% by weight polyethylene glycol in formic acid and brought to a temperature of below about 18° C., as a thin layer onto a carrier foil resistant to the solution components, introducing said casting solution on said casting foil into a precipitation and washing bath, withdrawing said casting solution as a coagulated and washed membrane from said carrier foil, stretching said coagulated and washed membrane in at least one direction to a ratio from 1.5:1 up to 2.5:1 and subsequently drying said coagulated and washed membrane.

A resistive current limiter in accordance with the invention can be produced by a process which comprises producing a homogeneous melt from an oxide mixture suitable for forming high-temperature superconductors in a specified stoichiometry allowing the melt at temperatures above 900° C. to run into a casting zone rotating about its horizontal axis, removing the molding, solidified as a cylinder, from the casting zone, sawing the cylinder so as to form a gap extending parallel to its axis, sawing a multiplicity of slits into the cylinder parallel to the gap and, finally, heat-treating the cylinder for up to 150 hours at 700° to 900° C. in an oxygen-containing atmosphere.