Translation of "Conductive foam" in German

It can be constructed in the manner of a unitary body from conductive foam.

The X-Y-Z conductive foam used for all sides conductive requirement and cost economical.

For electric discharge, you can use an EMI gasket or an electrically conductive foam as well.

Electrode using a combination of conductive foam, can be surrounded by the insulation effect of the test subjects.

Please choose the appropriate electrically conductive foam, rubber or sheet material to continuou.

During the course of a measurement, the carrier shifts 8 mm under the corona wire at a speed of about 50 cm/s, and stops at the point where the contact tip dips into an earthed conductive foam.

Such a sensor arrangement may also be constructed in the form of a multilayer capacitance means from conductive foam so that the total change in capacitance, upon compression of the elastic sensor carrier, can reach high values.

Instead, two openings 13 next to the cutout 21 are partially filled with a conductive plastic foam material 24 (indicated by broken lines), and the wire ends 25 of the voice coil 16 are plugged into the conductive plastic material 24 .

For the protein transfer, the gel with the nitrocellulose lying on it was placed between Whatman 3 MM filter paper, conductive foam 1 cm thick and two carbon plates which conducted the current via platinum electrodes.

Coating 4 can be contacted at an electronic control 7 by means of a contact 6, which can be formed, for example, from an electrically conductive foam.

In addition, it is proposed that the contact sensor have an electronic switch, an inductive or capacitive position sensor, a piezo element, a strain gauge, a conductive foam and/or a light barrier.

The surface treating device (1) according to claim 1, wherein the vertical contact sensor (6) has an electronic switch (13), an inductive or capacitive position sensor, a piezo element, a strain gauge, a conductive foam and/or a light barrier.

A cell coil has two contacts (positive pole and negative pole), after insertion of the cell coil in a cell can, a contact, typically the negative pole, is automatically connected with the electrically conductive cell can and with the electrically conductive metal foam via the cell can.

In this case the electrical side in turn can be constructed as a grid-like electrically conductive element, as a metallic strip, as an electrically conductive foam or the like.

Instead of the electrically conductive foam layer used in the relevant known proximity switch, however, a compressible conductive polymer is used in the known capacitive keyboard layout.

Thus, the electrically conductive side of the covering element can be formed, for example, by an electrically conductive element having a grid-like construction, or by an electrically conductive foam.

Underneath the electrode plate 21, provision is made for an electrically conductive foam layer 22, underneath which a hydrogel disk 23 is provided, with a vinyl film 24 being stretched over the entire arrangement and secured by a clamping ring 25 .

Instead of the electrically conductive foam layer used in the relevant known proximity switch here however a plastic body made of conductive plastic or a rubber material and if required silicon is used, and the respective fixed assembly of the relevant plastic body is ensured in that either the relevant plastic body is placed on the associated contact surface and/or the cover plate by a conductive adhesive or double adhesive band and/or is set on a fastening pin.

As is already the case in the embodiment examples described above, the electrically conductive side(s) of the top layer can be formed by an electrically conductive element having a grid-like construction, an electrically conductive foam, a metallic strip, a textile sheet-like structure with integrated metallic threads, or a printed-on electrically conductive layer.

The European Patent reference EP 859 467 B1 describes a sensor device with a capacitance sensor element consisting of conductive foam, which is pressed onto the back side of a panel.

The electrically conductive field could also be elastic, especially elastic in volume, for example, and constructed using an electrically conductive foam in order to compensate for unevenness or curves between the panel and the circuit board.

Our conductive foam, conductive rubber & conductive sheets series is a line of silicone rubber products that have been given electrical conductivity through the addition of carbon and other electrically conductive materials.