Übersetzung für "Temperaturmesswerte" in Englisch

For an extremely accurate temperature reading, pair it with our tempe external temperature sensor.

If appropriate, measured temperature values can be detected at different points and optionally averaged.

The actual measurement values measured by the IR sensor are usually temperature values.

Thus at least two temperature measured values at different times are necessary in order to measure a temperature profile.

Capture accurate temperature readings without taking your eyes off the screen.

Standard thermometers for the measuring element use platinum, since it is less oxidized and accurately gives the temperature readings.

When recording the temperature measuring values by means of the known device, however, the result is not a steady measuring point pattern.

The product features a display together with a data logging function storing up to 7770 temperature readings.

The units °C and °F are available to digitally display the temperature measurements.

The CO2 concentrations and temperature measurements are available on the analogue current or voltage outputs.

Temperature measuring data can be subsequently obtained at different time intervals; naturally, the temperature curve can be more precisely established the more measuring data are stored between T 0 and the point at which the asymptotic temperature T A is reached.

It is an object of the invention to provide a temperature sensing device by which at least two measured temperature values advantageously taken into account during the operation of an internal-combustion engine can be sensed in a favorable manner.

The 848T Wireless monitors up to four independently configurable RTD, thermocouple, ohm, millivolt and 4 – 20 mA inputs allowing users access to more temperature measurements without any signal wire.

In conjunction with the DL 10 data logger, a freely programmable, digital display unit with four analogue, independently programmable sensor inputs (for example, for two DMU 08 T), as well as comprehensive data logger functionality, the pressure and temperature values can be displayed with a single display.

Memory function recalls 32 temperature readings on the thermometer, allowing you to keep track of fluctuations with a large, easy to read digital display.

In order to measure the correct temperature, either disconnect the datalogger from the USB interface or use an external temperature sensor.

The Gateway is the network master or coordinator where pressure and temperature readings are gathered before being sent via Bluetooth to view on devices such as a tablet.

For the temperature values, the 'live' node is forwarded to the function 'get_temperature()' and the tuple from the return value is saved in two variables 'tvalue' (temperature value) and 'tunit' (temperature unit).

A new, optical fiber based, measuring system has been developed, capable of delivering accurate temperature readings every 20 seconds.

Of course, the isolating diaphragm error due to the thermal expansion of the pressure transfer liquid in the respective hydraulic paths based on the temperature measured values can also be determined and be taken into consideration for the correction of the output signal.

The measured temperature values or the voltage values characterizing the temperature are transmitted to the corresponding evaluation unit 4 or 31 which assumes here in addition the function of a compensation unit for temperature compensation of the measured results supplied of the sensors 3 or 30 .

Here, too, several input quantities can be taken into consideration in combination, for example the number of recorded shifting operations and diverse measured values, preferably measured temperature values.

These temperature values are determined by the IR sensor preferably on the basis of the IR radiation received from the entire area of the field of view, and they therefore represent average temperature values.

A further increase in the accuracy of measurement and the representativeness of the measured temperature values determined can be achieved in that a single temperature sensor is used which is attached at a central position relative to the subassembly, and is preferably joined to the subassembly.

In step 32, there is a request whether the number n of the measured temperature values detected up to now is already 10 (or another value, if more or less measured values are to be averaged).

The two temperature sensors 35, 37, each one arranged more or less in the middle of the two electrodes 15, 20, provide measured temperature values from which an average temperature is determined that provides a more accurate indication of the temperatures prevailing inside the oil quality sensor 1 .

In a preferred enhancement of the invention, the temperature calibration value is determined on the basis of several measured temperature values by the following steps:

Measured temperature values are now determined continuously, from which final temperature values are calculated continuously over a period of time.

Since only a few measured temperature values are present at the beginning of the calibration step, the statistically distributed measuring precision impacts the calibrated final value to an essentially greater degree.