Übersetzung für "Blinksignal" in Englisch

This type of a flashing signal is illustrated in FIG. 2.

Thus, the flashing signal is better perceived in road traffic.

This can occur, for example, in that a flashing signal is output via the lamp 21.

After the expiration of the inoperative period, the alarm readiness is activated, but the double flashing signal continues to be emitted.

For this an indicator element A8 is provided which indicates this condition via a noticeable blinking signal.

To the human eye, the indicator signal appears still with the frequency of 1.5 Hz.

Even at low tension (e.g. at a low rev range) the indicators give off a constant signal.

If it is visual it shall be a flashing light which, at least in the event of the malfunction of any of these direction indicator lamps, is either extinguished, or remains alight without flashing, or shows a marked change of frequency.

In order to indicate an operation malfunction within an individual set up (flash signal by alternately setting operation signal stores OS6 and OS1) even in blocked stations, by means of the station lamp connected to output terminal K, an exclusive OR circuit (exclusive OR: U8, U9, OD) is interposed between the outputs of stores OS1 and OS6 and the driving stage for output terminal K.

To provide the operator with a signal indicating the failure of the lamp, the digital display is actuated with current pulses to produce a flashing signal.

When the power consumption of the lamp decreases as a result of clustering of the filament, the power supply is periodically interrupted thereby producing a flashing signal to warn the user.

A radiation power reduced by only a certain portion due to a partial short-circuit of the filament could not be recognized without this flashing signal, although such reduced radiation power would be insufficient for properly curing the irradiated material.

Then the end user is shown top right in the display by a continuous flashing signal that the apparatus is activated.

If, for instance, an obstruction is detected by a sensor on the left side of the vehicle, then there will appear in the wide angle mirror on the left driver's side a blinking signal (Claim 5), which alerts the driver that, in this mirror, that is, in this display apparatus, that obstruction is visible, which was detected by the sensor (Claim 6).

A fault indication signal device 8 connected to the electronic additive metering device 6 monitors its operation and emits a signal (for example a flashing light) in the event of a malfunction.

An optical indicator 44 comprising a light-emitting diode is connected to the output 43 of the amplifier circuit 17 in parallel with the magnetic recording head 18. This indicator produces an optical signal which blinks in the rhythm of the pulses applied to the magnetic recording head 18, so that the user of the apparatus has an indication that the marking signals are applied to the magnetic-recording head.

The combination of three high-power LEDs and the successful Kellermann HighPower LED technology means that these turn signals are incredibly bright.

At this point, the rest of the LED light guide is dimmed to make the indicator even more noticeable.

Press the button Fig.2 for at least four seconds (until the turn signals flash) to store the desired open position.

However, the apparatus for generating an alarm can be designed such that they signal their activation by a blinking signal and/or an acoustical control sound.

This is advantageous insofar as a “beep signal” is easily missed in a noisy environment, while a “flashing signal” cannot be recognized by blind people.