Übersetzung für "Cycling rate" in Deutsch

This means either that the possible cycling rate of the mold is reduced or that a large supply of these molds is required.

At a cycling rate predefined by the sensor circuit timing cycle, the fault patterns are continuously updated and can be continuously queried.

Therefore, the task of the invention consists in indicating a method for fabricating a spring hinge, which on the one hand is economical and on the other hand permits to attain a high cycling rate.

Since the hinge part is punched out of a strip-shaped material and is then bent, the fabrication process is greatly simplified, so that it can be fabricated on less complicated machinery and at a higher cycling rate in a very economical manner.

Since this energy is less than it would be if a glass had to be heated up from room temperature, it is possible to use a weaker energy source at the same cycling rate, or, with a weaker energy source, to shorten the cycling times for the severance, in comparison to non-preheated glass.

For example, in the case of a 1500 W heating system on a 230 V public power supply system, the permissible cycling rate is limited to approximately 11 switching operations per minute (calculated from the percentage voltage drop as the prescribed standard supply-system line impedance of 0.4+0.25i ohm and read from the permissible flicker curve).

Tracks heart rate, pace, distance, calories burnt and duration Cycling Tracks heart rate, altitude, altitude delta, gradient, ascent, descent, speed, 3D distance, calories burnt, duration, breadcrumb trail and preloaded trails (Cadence - through an optional cadence sensor)

Then, this solution can be integrated in a particularly simple manner into an existing system, and the tampograph can be extended without reducing the usual cycling rate.

If required, several stations with tampographs can also accordingly be arranged one after the other in a synchronized press, in order to achieve the desired cycling rate.

The size of the coupling capacitor depends on the maximum output current of the first stage and the cycling rate of the charge pump.

The insertion density may be varied by adjusting the transport rate of the fleece material and needle cycling rate.

Compared to the former machine type fabrication methods, one achieves, with a method according to claim 1, a four-fold or six-fold increase of the cycling rate, wherein for instance in a fully automated machining fabrication one machine is capable of producing 20-30 hinge parts per minute, while with the method according to claim 1 approximately 120 pieces per minute can be produced.

With its attractive pricing the module lowers the costs of building network nodes, e.g. in applications such as cycling computers, heart rate and blood pressure monitoring, blood glucose meters, scales, thermometers, mobile accessories, sports and fitness sensors, remote controls and toys, key fobs and wrist bands, 3D glasses and gaming controllers.

A high cycle rate of the machine requires at least periodic correspondingly high transport speeds of the objects.

The design configuration must always depend on the highest cycle rate.

Because the separating element is movable, an increase in the cycle rate is possible.

In the packing of cigarettes, extremely high cycle rates are achieved.

Speed, force, position, and cycle rate can be reproduced exactly.

It is also quiet and meets the requirements of the high cycle rates of the printing machine.

This easily copes with the cycle rate of 80 cycles per minute.

It is then determined whether the residual time is greater than the cycle rate.

In the absence of corresponding events, the cycle rate is reduced.

This contributes to operational safety at high cycle rates.

These other electrodes are then reduced in their cycle rate independently of their detection.

Owing to the heavyweight mechanism connected herewith, the cycle rate is very limited.

Here, a high cycle rate alongside high process stability is required in particular.

The disadvantage is a slightly lower cycle rate.

For example, the first cycle rate is selected synchronously to the cycle rate of the first task.

A cycle rate is to be understood as an average number of cycles per unit time.

Therefore, a large format range can be processed with ideally high cycle rates.

No high cycle rates can be achieved with this system.

Thus a higher cycle rate can be used and the requirement for logic cells can be reduced.

The cycle rate of the method can also be increased in this manner.

For this reason the light sources are actuated alternately at a defined cycle rate.

When the job becomes dynamic, high cycle rates demand the maximum from oval vacuum cups.

This principle enormously raises cycle rates.