Übersetzung für "Sprunghöhe" in Englisch

This form has the highest jump height.

Improves movement speed and jump height.

However, only the jump height above the ramp is rated here.

Thus, a step height can be attained by a suitable additional gripper device.

The magnitude of the jump can be given directly by means of the above formulas.

With a height of 192 metres the dream of flying almost comes true there.

An enlarged jump distance has the advantage that the time interval between reversals is increased.

Then, the jump distance may be steadily or continuously shortened, since also the reversal frequency is reduced.

For example, horizontal lines or colour gradations allow the player to better assess his jump height.

Snake form has the lowest jump height.

Set the power and jump height with the mouse, press the smack.

During the jump, the platform supports snap, causing the platform to hinge downward and absorb some of the force from falling.

Muscles within the body can be reconfigured for the control of powerful motors, and to feel and sense exoskeletal movements, augmenting humans' strength, jumping height and running speed.

Due to the non-linear characteristic, it is also advantageous to control the amplitude and duration of the correction signal dependent on the difference in gradation value (skip height) and dependent on the gradation value itself.

For taking into account the gradient amplitude, moreover, a kind of "memorization" can be taken into account, i.e. an aftereffect of contrast gradients on their surroundings.

At the beginning and end of the insertion interval ai, the insertion signal sj has a first and a second step height h1, h2, respectively, with respect to the original stereo multiplex signal sm.

The first and second step heights h1, h2 can be eliminated by a simple linear interpolation, namely by adding the interpolation value i1, shown in the lower part of FIG. 2, to the insertion signal sj.

This interpolation value il is formed by linear time interpolation of the first and second step heights h1, h2, e.g., by means of a circuit arrangement as shown in FIG. 7.

At the beginning of the switching signal u, the set input S of the accumulator register z in the accumulator loop is loaded with the first step height h1.

A further point is that the support face gives way yieldingly when the gymnast bears against it so that there is a certain degree of damping and furthermore the gymnast benefits from a useful reinforcing effect as regards the achievable height and length of his vault owing to the rebound of the board.

The method as recited in claim 11, further comprising calculating a magnitude of the step function on the basis of the gain adjusted in the proportional branch and of the maximum permissible current intensity for the electro-motor.

The jump between the charging and discharging process of the capacitor 26 is determined by the parallel connection of the capacitor 25 and resistor 27.

However, it is also possible to increase or decrease the so-called jump distance in one or more phases of the winding cycle.

Consequently, an enlarged jump distance is primarily used at the beginning of a winding cycle, i.e., at the start of the stepped precision wind phase.

At the sudden transition 19, striking rod 6 and therefore scraper 9 is moved in a sudden or jerky movement about the jump height of transition 19 in the direction of drive means 10.