Übersetzung für "Rotorfläche" in Englisch
																						In
																											dieser
																											Betriebsstellung
																											ist
																											die
																											effektive
																											Rotorfläche
																											bezogen
																											auf
																											die
																											Windrichtung
																											6
																											maximiert.
																		
			
				
																						In
																											this
																											operating
																											position,
																											the
																											rotor
																											surface
																											effective
																											with
																											respect
																											to
																											the
																											wind
																											direction
																											6
																											is
																											maximized.
															 
				
		 EuroPat v2
			
																						Das
																											derzeitige
																											Wachstum
																											der
																											Windenergieanlagen
																											be
																											trifft
																											insbesondere
																											die
																											Rotorfläche.
																		
			
				
																						Growth
																											in
																											wind
																											turbines
																											is
																											currently
																											mainly
																											driven
																											by
																											the
																											growth
																											in
																											the
																											rotor
																											area.
															 
				
		 ParaCrawl v7.1
			
																						Die
																											überstrichene
																											Rotorfläche
																											beträgt
																											6.720
																											Quadratmeter.
																		
			
				
																						The
																											swept
																											rotor
																											area
																											is
																											6,720
																											square
																											metres.
															 
				
		 ParaCrawl v7.1
			
																						Die
																											Werkzeughalter
																											44
																											sind
																											in
																											Taschen
																											46
																											montiert,
																											die
																											in
																											die
																											Rotorfläche
																											eingeschnitten
																											sind.
																		
			
				
																						The
																											tool
																											holders
																											44
																											are
																											mounted
																											within
																											pockets
																											46
																											that
																											are
																											cut
																											into
																											the
																											rotor
																											surface.
															 
				
		 EuroPat v2
			
																						Im
																											Binnenland
																											sind
																											hohe
																											Türme
																											und
																											ein
																											großes
																											Verhältnis
																											von
																											Rotorfläche
																											zu
																											Nennleistung
																											zu
																											empfehlen.
																		
			
				
																						High
																											towers
																											and
																											a
																											large
																											rotor
																											surface
																											to
																											rated
																											power
																											ratio
																											are
																											recommended
																											inland.
															 
				
		 ParaCrawl v7.1
			
																						Bei
																											Sturm
																											kann
																											die
																											Differenz
																											innerhalb
																											der
																											Rotorfläche
																											20
																											oder
																											40
																											m/s
																											ausmachen.
																		
			
				
																						During
																											a
																											storm,
																											the
																											difference
																											within
																											the
																											rotor
																											area
																											can
																											be
																											20
																											or
																											40
																											m/s.
															 
				
		 ParaCrawl v7.1
			
																						Da
																											das
																											Misch-
																											und/oder
																											Plastifiziergut
																											ausserdem
																											gegen
																											die
																											Rotorfläche
																											zwischen
																											den
																											Durchtrittsöffnungen
																											gepresst
																											wird,
																											können
																											auch
																											grosse
																											Friktionskräfte
																											erreicht
																											werden.
																		
			
				
																						Because
																											the
																											material
																											to
																											be
																											mixed
																											or
																											plasticated
																											is
																											also
																											pressed
																											against
																											the
																											internal
																											rotor
																											surfaces
																											defining
																											the
																											passageways,
																											very
																											high
																											friction
																											forces
																											are
																											also
																											obtained.
															 
				
		 EuroPat v2
			
																						Dabei
																											wird
																											die
																											Rotorfläche
																											nach
																											einem
																											vorbestimmten
																											Verhältnis
																											auf
																											die
																											einzelnen
																											Register
																											aufgeteilt,
																											z.B.
																											zu
																											1/3
																											und
																											2/3,
																											um
																											drei
																											Schaltstellungen
																											in
																											Abhängigkeit
																											vom
																											Massenstrom
																											realisieren
																											zu
																											können.
																		
			
				
																						In
																											this
																											case,
																											the
																											rotor
																											surface
																											is
																											divided
																											according
																											to
																											a
																											defined
																											ratio
																											into
																											the
																											individual
																											registers,
																											for
																											example,
																											at
																											1/3
																											and
																											2/3,
																											in
																											order
																											to
																											be
																											able
																											to
																											implement
																											three
																											switching
																											positions
																											as
																											a
																											function
																											of
																											the
																											mass
																											flow.
															 
				
		 EuroPat v2
			
																						Verfahren
																											nach
																											Anspruch
																											2,
																											dadurch
																											gekennzeichnet,
																											daß
																											die
																											Rotorfläche
																											des
																											Druckwellenladers
																											(COM)
																											zu
																											1/3
																											und
																											2/3
																											in
																											verschiedene
																											Register
																											unterteilt
																											ist.
																		
			
				
																						Process
																											according
																											to
																											claim
																											2,
																											wherein
																											a
																											rotor
																											surface
																											of
																											the
																											compression
																											machine
																											is
																											divided
																											at
																											?
																											and
																											?
																											into
																											different
																											registers.
															 
				
		 EuroPat v2
			
																						Insbesondere
																											in
																											Verbindung
																											mit
																											den
																											oben
																											genannten
																											Lastmessmitteln
																											erhalten
																											die
																											Steuermittel
																											ein
																											sehr
																											genaues
																											Bild
																											über
																											die
																											momentanen
																											Windverhältnisse
																											über
																											der
																											Rotorfläche:
																											durch
																											die
																											Lastmessmittel
																											können
																											die
																											Steuermittel
																											eine
																											absolut
																											vorhandene
																											Last
																											berücksichtigten
																											und
																											durch
																											die
																											Messmittel
																											zur
																											Bestimmung
																											des
																											Anströmwinkels
																											kann
																											darüber
																											hinaus
																											auch
																											-
																											unter
																											Berücksichtigung
																											der
																											tatsächlichen
																											Rotorblattstellung
																											-
																											eine
																											genaue
																											Bestimmung
																											der
																											Größe
																											des
																											zu
																											verstellenden
																											Winkels
																											vorgenommen
																											werden.
																		
			
				
																						Particularly
																											in
																											conjunction
																											with
																											the
																											above-mentioned
																											load-measuring
																											means,
																											the
																											control
																											means
																											have
																											a
																											very
																											accurate
																											picture
																											about
																											the
																											instantaneous
																											wind
																											conditions
																											over
																											the
																											area
																											of
																											the
																											rotor:
																											by
																											virtue
																											of
																											the
																											load-measuring
																											means
																											the
																											control
																											means
																											can
																											take
																											account
																											of
																											an
																											absolutely
																											occurring
																											load
																											and
																											in
																											addition
																											by
																											virtue
																											of
																											the
																											measuring
																											means
																											for
																											determining
																											the
																											afflux
																											angle—having
																											regard
																											to
																											the
																											actual
																											rotor
																											blade
																											position—it
																											is
																											also
																											possible
																											to
																											provide
																											for
																											accurate
																											determination
																											of
																											the
																											magnitude
																											of
																											the
																											angle
																											to
																											be
																											adjusted.
															 
				
		 EuroPat v2
			
																						Derzeit
																											übliche
																											Verhältnisse
																											von
																											installierter
																											Generatorleistung
																											zu
																											Rotorfläche
																											(rating)
																											liegen
																											zwischen
																											460
																											und
																											330
																											W/m
																											2,
																											wobei
																											letzterer
																											Wert
																											für
																											binnenlandoptimierte
																											Anlagentypen
																											mit
																											Blattverstellung
																											gilt.
																		
			
				
																						Presently
																											usual
																											ratios
																											between
																											the
																											performance
																											of
																											the
																											generator
																											as
																											installed
																											and
																											the
																											rotor
																											area
																											(rating)
																											are
																											in
																											a
																											range
																											from
																											460
																											to
																											330
																											W/m
																											2,
																											the
																											latter
																											value
																											pertaining
																											to
																											pitch-regulated
																											turbines
																											optimized
																											for
																											inland
																											use.
															 
				
		 EuroPat v2
			
																						Aufgabe
																											der
																											Erfindung
																											ist
																											es
																											daher,
																											die
																											oben
																											genannten
																											Probleme
																											zu
																											vermeiden
																											und
																											eine
																											Windenergieanlage
																											zur
																											Verfügung
																											zu
																											stellen,
																											bei
																											der
																											die
																											Belastungen
																											reduziert
																											werden,
																											die
																											aufgrund
																											lokaler
																											und
																											vorübergehender
																											Spitzen
																											in
																											der
																											Windgeschwindigkeit
																											in
																											Teilbereichen
																											der
																											Rotorfläche
																											auftreten
																											können.
																		
			
				
																						The
																											disclosed
																											wind
																											power
																											installation
																											therefore
																											avoids
																											specified
																											problems
																											of
																											known
																											installations
																											and
																											provides
																											a
																											wind
																											power
																											installation
																											in
																											which
																											the
																											loadings
																											which
																											can
																											occur
																											due
																											to
																											local,
																											temporary
																											peaks
																											in
																											the
																											wind
																											speed
																											in
																											portions
																											of
																											the
																											rotor
																											area
																											are
																											reduced.
															 
				
		 EuroPat v2
			
																						Beide
																											vorgenannten
																											Möglichkeiten
																											des
																											Standes
																											der
																											Technik
																											berücksichtigen
																											nicht,
																											dass
																											es
																											insbesondere
																											bei
																											einem
																											großen
																											Rotordurchmesser
																											zu
																											einer
																											ungleichmäßigen
																											Verteilung
																											der
																											Windverhältnisse
																											über
																											die
																											Rotorfläche
																											kommen
																											kann.
																		
			
				
																						The
																											above
																											mentioned
																											options
																											in
																											the
																											state
																											of
																											the
																											art
																											do
																											not
																											take
																											account
																											of
																											the
																											fact
																											that,
																											particularly
																											when
																											a
																											large
																											rotor
																											diameter
																											is
																											involved,
																											there
																											can
																											be
																											a
																											non-uniform
																											distribution
																											of
																											the
																											wind
																											conditions
																											over
																											the
																											area
																											of
																											the
																											rotor.
															 
				
		 EuroPat v2
			
																						Darüber
																											hinaus
																											ermöglicht
																											es
																											die
																											erfindungsgemäße
																											Windenergieanlage
																											die
																											momentane
																											Verteilung
																											der
																											Windgeschwindigkeiten
																											auf
																											der
																											Rotorfläche
																											optimal
																											auszunützen
																											und
																											daher
																											zu
																											einer
																											erhöhten
																											Leistungsausbeute
																											der
																											Windenergieanlage
																											beizutragen,
																											da
																											alle
																											Rotorblätter
																											immer
																											mit
																											dem
																											gewünschten
																											und
																											somit
																											optimalen
																											Blattwinkel
																											gefahren
																											werden
																											und
																											daher
																											der
																											Wirkungsgrad
																											pro
																											Rotorblatt
																											gegenüber
																											dem
																											Wirkungsgrad
																											der
																											Windenergieanlagen
																											aus
																											dem
																											Stand
																											der
																											Technik
																											ansteigt.
																		
			
				
																						In
																											addition,
																											the
																											wind
																											power
																											installation
																											according
																											to
																											the
																											invention
																											permits
																											optimum
																											use
																											to
																											be
																											made
																											of
																											the
																											instantaneous
																											distribution
																											of
																											the
																											wind
																											speeds
																											on
																											the
																											rotor
																											area
																											and
																											thus
																											makes
																											it
																											possible
																											to
																											contribute
																											to
																											an
																											increased
																											power
																											output
																											from
																											the
																											wind
																											power
																											installation
																											as
																											all
																											rotor
																											blades
																											are
																											always
																											operated
																											with
																											the
																											desired
																											and
																											thus
																											optimum
																											blade
																											angle
																											and
																											therefore
																											the
																											level
																											of
																											efficiency
																											per
																											rotor
																											blade
																											rises
																											in
																											comparison
																											within
																											the
																											efficiency
																											of
																											the
																											wind
																											power
																											installations
																											in
																											the
																											state
																											of
																											the
																											art.
															 
				
		 EuroPat v2
			
																						Denn
																											indem
																											die
																											Last
																											direkt
																											im
																											Rotorblatt
																											ermittelt
																											wird,
																											kann
																											ähnlich
																											wie
																											bei
																											der
																											oben
																											genannten
																											direkten
																											Ermittlung
																											der
																											Windgeschwindigkeit
																											am
																											Rotorblatt,
																											eine
																											sehr
																											präzise
																											Information
																											über
																											das
																											Windstärkenprofil
																											über
																											der
																											Rotorfläche
																											gewonnen
																											werden.
																		
			
				
																						For,
																											by
																											the
																											load
																											being
																											ascertained
																											directly
																											in
																											the
																											rotor
																											blade,
																											very
																											precise
																											information
																											about
																											the
																											wind
																											strength
																											profile
																											over
																											the
																											area
																											of
																											the
																											rotor
																											can
																											be
																											obtained,
																											in
																											a
																											similar
																											manner
																											to
																											the
																											above-discussed
																											procedure
																											for
																											directly
																											ascertaining
																											the
																											wind
																											speed
																											at
																											the
																											rotor
																											blade.
															 
				
		 EuroPat v2
			
																						Die
																											Anordnung
																											der
																											Magnus-Rotoren
																											beruht
																											auf
																											einem
																											Gedanken,
																											dass
																											eine
																											bestimmte
																											Rotorfläche
																											erforderlich
																											ist,
																											um
																											die
																											gewünschte
																											Antriebsleistung
																											durch
																											die
																											Magnus-Rotoren
																											zu
																											erzielen.
																		
			
				
																						The
																											arrangement
																											of
																											the
																											Magnus
																											rotors
																											is
																											based
																											on
																											a
																											notion
																											that
																											a
																											given
																											rotor
																											area
																											is
																											required
																											to
																											achieve
																											the
																											desired
																											drive
																											power
																											by
																											the
																											Magnus
																											rotors.
															 
				
		 EuroPat v2
			
																						Nach
																											IEC-NORM
																											61400-2:2006
																											haben
																											KWEA
																											eine
																											maximale
																											Rotorfläche
																											von
																											200
																											m²,
																											was
																											einer
																											Nennleistung
																											von
																											maximal
																											etwa
																											50
																											kW
																											entspricht,
																											bei
																											einer
																											elektrischen
																											Spannung
																											unterhalb
																											von
																											1.000
																											V
																											AC
																											oder
																											1.500
																											V
																											DC.
																		
			
				
																						According
																											to
																											IEC
																											standard
																											61400-2:2006,
																											small
																											wind
																											turbines
																											have
																											a
																											maximum
																											rotor
																											area
																											of
																											200m²,
																											which
																											equates
																											to
																											a
																											nominal
																											power
																											of
																											a
																											maximum
																											of
																											50kW
																											for
																											an
																											electrical
																											voltage
																											of
																											below
																											1000VAC
																											or
																											1500VDC.
															 
				
		 ParaCrawl v7.1
			
																						Die
																											Folge
																											dessen
																											ist,
																											dass
																											zwar
																											in
																											einigen
																											Bereichen
																											das
																											Rotorblatt
																											oder
																											die
																											Rotorblätter
																											im
																											relativ
																											optimalen
																											Betrieb
																											arbeiten,
																											aufgrund
																											der
																											Verschiedenheit
																											des
																											Anströmungsprofils
																											in
																											der
																											Rotorfläche
																											jedoch
																											in
																											einigen
																											anderen
																											Bereichen
																											eher
																											suboptimal
																											arbeiten.
																		
			
				
																						The
																											consequence
																											of
																											this
																											is
																											that
																											in
																											some
																											regions
																											the
																											rotor
																											blade
																											or
																											blades
																											admittedly
																											operate
																											in
																											a
																											relatively
																											optimum
																											manner
																											but
																											in
																											some
																											other
																											regions
																											the
																											rotor
																											blades
																											rather
																											operate
																											in
																											sub-optimum
																											manner
																											by
																											virtue
																											of
																											the
																											different
																											nature
																											of
																											the
																											afflux
																											flow
																											profile
																											in
																											the
																											swept
																											rotor
																											area.
															 
				
		 EuroPat v2
			
																						Das
																											Gegenmesser
																											14
																											hat
																											eine
																											Reihe
																											von
																											Zähnen
																											24,
																											die
																											axial
																											auf
																											die
																											Täler
																											zwischen
																											den
																											Rippen
																											22
																											des
																											Rotors
																											ausgerichtet
																											sind,
																											wobei
																											ein
																											solcher
																											Zahn
																											24
																											pro
																											Tal
																											in
																											der
																											Rotorfläche
																											vorgesehen
																											ist.
																		
			
				
																						The
																											counter
																											knife
																											14
																											has
																											a
																											series
																											of
																											teeth
																											24
																											that
																											are
																											axially
																											aligned
																											with
																											the
																											valleys
																											between
																											the
																											ribs
																											22
																											of
																											the
																											rotor,
																											there
																											being
																											one
																											such
																											tooth
																											24
																											for
																											every
																											valley
																											in
																											the
																											rotor
																											surface.
															 
				
		 EuroPat v2
			
																						Weiter
																											ermöglicht
																											es
																											die
																											Erfindung,
																											eine
																											optimale
																											Ausrichtung
																											des
																											Rotors
																											auch
																											dann
																											zu
																											erreichen,
																											wenn
																											über
																											die
																											gesamte
																											Rotorfläche
																											gesehen
																											keine
																											homogenen
																											Windbedingungen
																											herrschen.
																		
			
				
																						Furthermore
																											the
																											invention
																											makes
																											it
																											possible
																											to
																											achieve
																											optimum
																											alignment
																											of
																											the
																											rotor
																											even
																											when
																											the
																											wind
																											conditions
																											are
																											not
																											homogeneous
																											over
																											the
																											entire
																											rotor
																											area.
															 
				
		 EuroPat v2
			
																						Das
																											ist
																											insbesondere
																											dann
																											von
																											Vorteil,
																											wenn
																											bei
																											Winden
																											aus
																											einer
																											bestimmten
																											Richtung
																											Verzerrungen
																											auftreten,
																											die
																											zu
																											unrichtigen
																											Messungen
																											der
																											Windrichtung
																											durch
																											die
																											Windfahne
																											führen,
																											oder
																											bei
																											denen
																											über
																											die
																											Rotorfläche
																											hinweggesehen
																											der
																											Wind
																											inhomogen
																											ist.
																		
			
				
																						This
																											is
																											particularly
																											advantageous
																											when
																											distortion
																											occurs
																											in
																											the
																											case
																											of
																											winds
																											from
																											one
																											specific
																											direction,
																											leading
																											to
																											incorrect
																											measurements
																											of
																											the
																											wind
																											direction
																											via
																											the
																											weathervane,
																											or
																											for
																											which
																											the
																											wind
																											is
																											not
																											homogeneous,
																											when
																											seen
																											over
																											the
																											rotor
																											area.
															 
				
		 EuroPat v2
			
																						Das
																											zu
																											montierende
																											Rotorblatt
																											weist
																											eine
																											große
																											Rotorfläche
																											und
																											folglich
																											eine
																											große
																											Angriffsfläche
																											für
																											den
																											Wind
																											auf.
																		
			
				
																						The
																											rotor
																											blade
																											to
																											be
																											mounted
																											has
																											a
																											large
																											rotor
																											surface
																											and
																											consequently
																											a
																											large
																											surface
																											exposed
																											to
																											the
																											wind.
															 
				
		 EuroPat v2
			
																						Für
																											den
																											Fall,
																											dass
																											der
																											Rotor
																											14
																											aufgrund
																											von
																											Verbrennungsinstabilitäten
																											im
																											Teillastbetrieb
																											der
																											Gasturbine
																											10
																											zu
																											Axialschwingungen
																											neigt,
																											kann
																											zusätzlich
																											zu
																											der
																											im
																											Kraftfluss
																											befindlichen
																											(belasteten)
																											Hauptspur
																											47
																											als
																											erstes
																											Spurlager
																											43
																											die
																											Nebenspur
																											49
																											als
																											zweites
																											Spurlager
																											45
																											durch
																											gleichzeitiges
																											Zuführen
																											des
																											Hydraulikmittels
																											auch
																											in
																											den
																											Spalt
																											zwischen
																											Lagerfläche
																											52
																											und
																											Rotorfläche
																											44
																											kraftschlüssig
																											gekoppelt
																											werden
																											mit
																											dem
																											Ziel,
																											das
																											Axialspiel
																											des
																											Rotors
																											14
																											zu
																											verringern.
																		
			
				
																						If
																											the
																											rotor
																											14
																											tends
																											toward
																											axial
																											vibrations
																											owing
																											to
																											combustion
																											instabilities
																											in
																											part-load
																											operation
																											of
																											the
																											gas
																											turbine
																											10,
																											it
																											is
																											possible,
																											in
																											addition
																											to
																											the
																											main
																											step
																											47
																											as
																											first
																											step
																											bearing
																											43
																											which
																											is
																											situated
																											in
																											the
																											force
																											flow
																											(and
																											is
																											under
																											load),
																											for
																											the
																											secondary
																											step
																											49
																											as
																											second
																											step
																											bearing
																											45
																											to
																											also
																											be
																											coupled
																											in
																											a
																											force-fitting
																											manner
																											by
																											simultaneous
																											supply
																											of
																											the
																											hydraulic
																											medium
																											into
																											the
																											gap
																											between
																											bearing
																											surface
																											52
																											and
																											rotor
																											surface
																											44,
																											with
																											the
																											aim
																											of
																											reducing
																											the
																											axial
																											play
																											of
																											the
																											rotor
																											14
																											.
															 
				
		 EuroPat v2
			
																						Die
																											Erfindung
																											macht
																											sich
																											hierbei
																											die
																											Erkenntnis
																											zu
																											Nutze,
																											dass
																											die
																											auf
																											den
																											Träger
																											zur
																											Aufnahme
																											des
																											Magnus-Rotors
																											einwirkenden
																											Kräfte
																											durch
																											die
																											zylindrisch
																											ausgebildete
																											Rotorfläche
																											eines
																											Magnus-Rotors
																											zunächst
																											aufgenommen
																											bzw.
																											erzeugt
																											werden,
																											und
																											sodann
																											mittels
																											des
																											Trägers
																											zur
																											Aufnahme
																											des
																											Magnus-Rotors
																											in
																											den
																											Schiffskörper
																											eingeleitet
																											werden.
																		
			
				
																						In
																											that
																											respect
																											the
																											invention
																											makes
																											use
																											of
																											the
																											realization
																											that
																											the
																											forces
																											acting
																											on
																											the
																											carrier
																											for
																											mounting
																											the
																											Magnus
																											rotor
																											are
																											firstly
																											carried
																											or
																											produced
																											by
																											the
																											rotor
																											surface
																											of
																											a
																											Magnus
																											rotor,
																											which
																											surface
																											is
																											of
																											a
																											cylindrical
																											configuration,
																											and
																											are
																											then
																											transmitted
																											to
																											the
																											body
																											of
																											the
																											ship
																											by
																											means
																											of
																											the
																											carrier
																											for
																											mounting
																											the
																											Magnus
																											rotor.
															 
				
		 EuroPat v2
			
																						Für
																											den
																											Fall,
																											dass
																											der
																											Rotor
																											14
																											aufgrund
																											von
																											Verbrennungsinstabilitäten
																											im
																											Teillastbetrieb
																											der
																											Gasturbine
																											10
																											zu
																											Axialschwingungen
																											neigt,
																											kann
																											zusätzlich
																											zu
																											der
																											im
																											Kraftfluss
																											befindlichen
																											(belasteten)
																											Hauptspur
																											47
																											als
																											erstes
																											Spurlager
																											43
																											die
																											Nebenspur
																											49
																											als
																											zweites
																											Spurlager
																											45
																											durch
																											gleichzeitiges
																											Zuführen
																											des
																											Hydraulikmittels
																											in
																											den
																											Spalt
																											zwischen
																											Lagerfläche
																											52
																											und
																											Rotorfläche
																											44
																											kraftschlüssig
																											gekoppelt
																											werden
																											mit
																											dem
																											Ziel,
																											das
																											Axialspiel
																											des
																											Rotors
																											14
																											zu
																											verringern.
																		
			
				
																						If
																											the
																											rotor
																											14
																											tends
																											toward
																											axial
																											vibrations
																											owing
																											to
																											combustion
																											instabilities
																											in
																											part-load
																											operation
																											of
																											the
																											gas
																											turbine
																											10,
																											it
																											is
																											possible,
																											in
																											addition
																											to
																											the
																											main
																											step
																											47
																											as
																											first
																											step
																											bearing
																											43
																											which
																											is
																											situated
																											in
																											the
																											force
																											flow
																											(and
																											is
																											under
																											load),
																											for
																											the
																											secondary
																											step
																											49
																											as
																											second
																											step
																											bearing
																											45
																											to
																											also
																											be
																											coupled
																											in
																											a
																											force-fitting
																											manner
																											by
																											simultaneous
																											supply
																											of
																											the
																											hydraulic
																											medium
																											into
																											the
																											gap
																											between
																											bearing
																											surface
																											52
																											and
																											rotor
																											surface
																											44,
																											with
																											the
																											aim
																											of
																											reducing
																											the
																											axial
																											play
																											of
																											the
																											rotor
																											14
																											.
															 
				
		 EuroPat v2
			
																						Der
																											Rotor
																											14
																											und
																											die
																											Nebenspur
																											49
																											sind
																											dann
																											kraftschlüssig
																											verbunden,
																											wohingegen
																											zwischen
																											der
																											Lagerfläche
																											50
																											und
																											der
																											Rotorfläche
																											42
																											ein
																											Luftspalt
																											(nicht
																											in
																											FIG
																											2
																											dargestellt)
																											vorhanden
																											ist.
																		
			
				
																						The
																											rotor
																											14
																											and
																											the
																											secondary
																											step
																											49
																											are
																											then
																											connected
																											in
																											a
																											force-fitting
																											manner,
																											whereas
																											there
																											is
																											an
																											air
																											gap
																											(not
																											illustrated
																											in
																											FIG.
																											2)
																											between
																											the
																											bearing
																											surface
																											50
																											and
																											the
																											rotor
																											surface
																											42
																											.
															 
				
		 EuroPat v2
			
																						Durch
																											die
																											Rotorachsneigung
																											verringert
																											sich
																											die
																											dem
																											Wind
																											zugeneigte
																											Rotorfläche
																											und
																											es
																											verringert
																											sich
																											damit
																											die
																											vom
																											Rotor
																											aufnehmbare
																											Windenergie,
																											insbesondere
																											im
																											Bereich
																											von
																											Windgeschwindigkeiten,
																											die
																											zwischen
																											0
																											und
																											10
																											m/s
																											liegen.
																		
			
				
																						By
																											tilting
																											the
																											rotor
																											axis,
																											the
																											rotor
																											surface
																											that
																											is
																											inclined
																											toward
																											the
																											wind
																											is
																											reduced
																											and
																											the
																											wind
																											energy
																											which
																											can
																											be
																											received
																											by
																											the
																											rotor,
																											in
																											particular
																											in
																											the
																											range
																											of
																											wind
																											speeds
																											between
																											0
																											and
																											10
																											m/s,
																											is
																											therefore
																											reduced.
															 
				
		 EuroPat v2
			
																						Es
																											besteht
																											die
																											Möglichkeit,
																											mittels
																											der
																											Pitch-Verstellung
																											die
																											wirksame
																											Rotorfläche
																											zu
																											verändern,
																											wobei
																											die
																											Rotorblätter
																											um
																											ihre
																											Längsachse
																											gedreht
																											werden.
																		
			
				
																						It
																											is
																											possible
																											to
																											change
																											the
																											effective
																											rotor
																											surface
																											by
																											means
																											of
																											the
																											pitch
																											adjustment
																											in
																											that
																											the
																											rotor
																											blades
																											are
																											rotated
																											around
																											their
																											longitudinal
																											axis.
															 
				
		 EuroPat v2
			
																						Die
																											Achse
																											weist
																											hierbei
																											im
																											Wesentlichen
																											im
																											stimmungsgemäßen
																											Betrieb
																											in
																											Richtung
																											des
																											Windes
																											und
																											der
																											Rotor
																											weist
																											wenigstens
																											eines,
																											üblicher
																											Weise
																											drei
																											Rotorblätter
																											auf,
																											die
																											eine
																											Rotorfläche
																											überstreichen,
																											die
																											somit
																											im
																											Wesentlichen
																											quer
																											zum
																											Wind
																											angeordnet
																											ist.
																		
			
				
																						In
																											that
																											case
																											in
																											normal
																											operation
																											the
																											axis
																											faces
																											substantially
																											in
																											the
																											direction
																											of
																											the
																											wind
																											and
																											the
																											rotor
																											has
																											at
																											least
																											one
																											and
																											usually
																											three
																											rotor
																											blades
																											which
																											pass
																											over
																											a
																											rotor
																											area
																											which
																											is
																											thus
																											arranged
																											substantially
																											transversely
																											relative
																											to
																											the
																											wind.
															 
				
		 EuroPat v2