Translation of "Spitzenkraft" in English

Peak force FS is the maximum value of the closing force.

Peak force FS is the maximum value of the closing or reactive force.

Guest Professorships allow the university to intensify its cooperation with top international faculty.

A mechanical overload protection becomes active in case allowable top force of 250 kN has been exceeded.

The maximum spring deflection shall be limited to 30 mm so that a maximum peak force of 300 N is achieved.

The closing of a power-operated door and the operation of a power-operated ramp are dynamic processes.

This phenomenon concerns the full range of qualifications - from unskilled workers to top academic professionals.

So, somebody like Usain Bolt will hit with a peak force of five times body weight but continuing to go faster than he goes will require him to hit even harder than that.

This thinking does not necessarily apply to the equipping operation since there the fitting pin is moved with a relatively high speed into the fitting aperture and accordingly a projecting clamping bolt will be loaded with a high peak force.

When changing forces are exerted on the pedal crank mechanism in accordance with the invention, they will be transmitted by said mechanism in such a manner that the exertion of a peak force on the crank will result in a storage of energy by at least one spring, which is thus stressed, so that the rotation of the sprocket wheel resiliently coupled to the pedal crank by said spring will be slower than the rotation of the pedal crank during the exertion of such peak forces, and that the spring can subsequently relax in part to deliver the stored energy to the sprocket wheel so that the rotation of the sprocket wheel will then be faster than the rotation of the pedal crank.

The invention relates further to the use of such a force measuring element to determine an interacting peak force or the behavior of forces against the time scale.

By means of a practical example, it will be shown how the two mentioned cases, i.e. reversible measuring in the elastic range and subsequent determination of a peak force which was effective during an overload event, can be combined to advantage.

When analyzing such accidents, it is of course desirable to know what peak force was responsible for the tool failure.

Determining this peak force is a simple matter with the force-measuring element according to the present invention, since only one resistance measurement must be made at the start of the experiment and another one any time after the breakage.

First, in a two-sheave drive, the total belt tension needed (tight plus slack side), whether at rest or in motion, must equal the total tension needed to transmit the peak power that is required.

Finding the best employees for the best business. We know what makes a highly qualified person in your branch and where we can find them.

Depending on the specifics of a system's duty cycle, the peak force and maximum speed will drive the selection of a motor:

After test the software shows a peak force diagram (togheter to the other diagrams) in which the last six measured expansion and compression peak of force are shown.

In the formula, A is an area which in the compression phase lies under the crimping force curve, starts at a normalized force of 1??, and extends as far as the peak force Fp=1.

It is only a matter of chance that a highly compentent person may be dissatisfied with his or her job and is looking for a new position.

Now, wherever our new top performer is finally available, the question is still asked: Do you have small rooms that urgently need to be dried?

Machiventa, of course, is our “point person” for this program and he will be working as representative for this three- part executive team.

The grappling force (i.e. the ability of the grapple to clamp and hold the timber) is very high and means that timber of all sizes easily rolls into the grapple.