Translation of "Schließkräfte" in English

Advantageously by this means, very large closing forces can be transmitted via the joint 18.

Essentially the closing forces cause only compressive stresses in the tubular conductor blank.

Closure forces of 1000 tonnes are nothing out of the ordinary with relatively large machines.

This leads to a considerable reduction to the closing forces which can be applied by the hand.

In the closing movement, however, closing forces must be applied against the force of gravity.

This is how the closing forces of the actuator can be kept relatively small.

High clamping force and a super wide opening will give you the flexibility that you need.

As a result, relatively small closing forces are required for closing the vehicle flap.

The gripper is therefore completely unsuitable for use with very high closing forces.

The opening forces thus generated overcome the closing forces acting on the second needle unit 30 .

This permits comparatively high closing forces with drive units of relatively small dimensions for the closing unit.

The result is different hydraulic closing forces originating from the pressure in the control chamber 11 .

Higher closing forces are very much desired for some vacuum forming processes, particularly for twin-sheet applicatons.

This results in energy savings due to lower cycle times and lower clamping forces needed.

In addition, the closing forces of the return springs in the hinges must be overcome.

In opening the doors the additional closing forces of the return springs in the hinges must be overcome.

These closing units usually consist of presses which have to comprise very large closing forces in particular in internal high pressure reshaping.

These are hydraulic piston-cylinder systems that can produce the relatively high closure forces over relatively shorter distances.

These closing units usually consist of presses which have to comprise very large closing forces in particular in internal high pressure reshaping.

Such high closure forces are applied in order to keep the mold cavity substantially constant.

This allows greater closing forces that contribute to an improved holding of the tissue and to improved vessel sealing.

The detecting device 48 senses the position of the gripping elements 42, 42 ? and the closure forces which occur.

Shortening of the measuring channel in turn leads to small closing forces, which is also advantageous.

The bimetallic plates 10 can therefore apply relatively great closing forces with small non-protruding dimensions.

Wide opening, Hardox 500 materials, high clamping force and mechanical end stops safeguard a long lifespan.

In order to obtain an equalization of the closing forces caused by the vacuum on the throttle body, in accordance with the invention, the throttle body has an inner space (27) which is closed off from the nozzle and is provided with at least one pressure equalization cutout (28) which connects the nozzle with the inner space.

A mixture-forming device according to claim 1, wherein outer and inner active surfaces of the throttle body are adapted to each other to reduce closing forces which act on the throttle body.

With increasing pressure p2 in the chamber 86, the force in the opening direction (counter to the arrow 75) becomes increasingly stronger, or with decreasing pressure p1 in the chamber 44, the sum of the closing forces becomes increasingly smaller.

These features ensure that the closing member may be reliably transferred, against the closing forces acting against it, into the open position.

In order to provide precise adaptation of the closing forces and of the closing and opening movements, the length adjusting device 8 for the auxiliary spindle 50 is introduced between the drive member 2 and the second spring-elastic coupling 11.