Übersetzung für "Verschmutzte oberfläche" in Englisch

Spray the cleaner on the soiled surface (let react for 5 minutes in case of persistent dirt).

Spray the whole soiled surface and let react up to 5 minutes.

Paints and varnishes can not be applied to the dirty surface.

The heat supply to the dirty surface can be metered by using adapted dwell times during the wiping movement.

During sharpening, material is removed from the old surface of the pencil tip, soiled during storage and use.

The soiled surface is treated in small sections by carefully rubbing with the cleaning agent, using cotton buds.

A method which has proven favorable is one wherein the "contaminated" surface is coated, prior to the coating with the photocathode, with a layer consisting of CsI:Na which is five to ten microns (5 to 10 ?m) thick. Thus a very clean base for the photocathode is obtained.

A method which has proven favorable is one wherein the "contaminated" surface is coated, prior to the coating with the photocathode, with a layer consisting of CsI:Na which is five to ten microns (5 to 10 ?m) thick.

The first test may be caused by some external factors caused by the dirty surface of the electrode of the oil cup when the oil sample is injected into the oil cup or before the oil injection.

This and the impact pressure of the gas means that the dirty surface is continually renewed, thus ruling all cross effects during measurement.

Such an agent is used in customary washing or cleaning methods to be carried out by machine or manually, in which soiled laundry or a soiled hard surface is exposed to an aqueous bath containing the agent with the aim of removing the soil from the textile or hard surface.

Purification of water basins is carried out by applying the biomass of the bacterial culture to the polluted surface by, e.g., spraying.

Apply to the soiled surface (if necessary use a brush) and leave for 10 minutes and then wash off.

Spray the soiled surface with CW 1:100 and let the product react shortly before entering a car wash or manual cleaning.

The traffic film remover rapidly cleans the soiled surface and then gives a very fast rinse that really aids the drying process of the vehicle.

When these pellets hit the contaminated surface with pressure, the dirt contracts under the cold conditions, breaks loose from the surface and is then simply blown away by the air pressure and the pellets that follow.

Then, using a cloth, sponge or brush to wash the dirty surface with the solution.

The best effect is obtained through applying the product on a moist cloth, even coating on a dirty surface and afterwards, rinsing with warm water and dry cleaning the product.

The surface had gathered dirt over the years but could not be cleaned with the usual aqueous solutions or solvents without damaging the paint.

Quick and easy to use: Spray the foam for the surface and leave for 1-5 minutes, then wipe it with paper towel.

Separating agent feed rollers are usually exchanged completely when their surface has become soiled or damaged.

Product Information: A cleaner for lightly soiled, water-resistant surfaces.

The result is soiled and discolored surfaces which are visually unattractive.

This means that when you spill anything, it will never stain the surface.

The staining agent is left for 10 minutes on the soiled surface.

The LSV works on almost any surface and is not susceptible to contaminated surfaces.

The analysis of the light is particularly advantageous when applying the plasma jet onto a contaminated surface.