Übersetzung für "Prüfroutine" in Englisch

It was not possible to execute the test routine properly.

This is typically used as a check before actually moving to the new position.

In parallel, the IMO was eager to supplement the Code with an audit scheme for the national administrations.

Both the Code and the audit scheme are due to be adopted at the IMO General Assembly in November 2005.

Since the setup of the remote backup including the keys is error-prone, a test routine is available.

Incentives, in the form of streamlined controls, will be proposed for ships whose flag has shown high-quality results, in particular through the application of the IMO flag State audit scheme.

Indeed, in its conclusions of 6 December 2002 relating to the action to be taken following the sinking of the Prestige, the Council had expressed its support for the work of the IMO which sought to draw up a flag State Code and a compulsory Audit Scheme designed to ensure that the flag States discharged their obligations under the international conventions.

It is alternatively possible, if the loops do not coincide at all, to implement such a test routine at different locations, possibly using the same "multi-bit code".

After the movement program has been completed, it may be determined, by means of a test routine, whether all points in the table were called up, and any defect may be reported.

Still the TSS 500N2F offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

In a test routine, the tool, which is clamped in a spindle of the tool machine, for example, is moved with respect to a probe disk of the probe system.

Still the TSS 500N4 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

Here you can find information when the test was developed, which systems are affected, what impact the vulnerabilities have and how they can be remediated.

Alternatively or in addition thereto, the transformation routine can be used in the check routine to check preferably every path point assigned to tolerance zone t to determine whether the point results in ambiguities in the axial data of manipulator 4 .

In the proposed method, the definition routine and the check routine are preferably executed until singularities as described above stop occurring.

With the practical implementation of the method schematically explained above in its principal steps, a checking routine started, in which one then proceeds as follows.

A preferred operating point where a start of the checking routine is released or initiated is, for example, characterized by average chamber speeds of the oxidation catalyst 3 or of the SCR catalyst 5 of about 50000 1/h and a temperature of about 250° C. or about 200° C. of the oxidation catalyst and/or of the particle filter 4 or of the SCR catalyst 5 .

After receiving the characteristic line, the checking routine is terminated and one returns to a normal engine operation without after-injection or secondary injection.

It is also essential that the previously defined tolerance zone be checked, at least in part with regard to kinematic singularities of the manipulator, using the offline programming environment in a check routine.

It is thereby ensured that singularities that are due exclusively to a very specific axial configuration, and that are caused by the control-related axial compensation in the real working mode are depicted in the tolerance zone and can be determined within the scope of the check routine.

Specifically, offline programming environment 10 is used to check, in a check routine, the at least one previously defined tolerance zone t at least in part in terms of kinematic singularities of manipulator 4; if a singularity occurs, an appropriate singularity routine is executed.

To achieve this, the test unit 19 comprises an appropriate program with a test routine which is automatically applied to every received localized or non-localized control and system task LRS, NLRS.