Übersetzung für "Fokusring" in Englisch

Gear rings on the aperture ring and focus ring are ready for Follow Focus systems.

Behind the focus ring is the shutter speed selection ring.

Aperture ring and focus ring optimized for use with Follow Focus systems.

Both lenses include a focus ring for quick switching between auto and manual focus.

And when the focus ring is moved again, the enlarged image detail reappears.

The focus ring features Linear Response MF for fine, responsive manual focus control.

The eyepiece offers ± 5 diopters of adjustment, that can be set with a traditional focus ring.

Like all other Ricoh lenses, the FLxxA-2M series has three fixing screws for the aperture and focus ring.

The aperture ring and focus ring are equipped with a gear rim for the use of a follow focus system.

The Zoom Ring has the same options as the Focus Ring and both rings can exchange their functions.

The SK-F01 has a large rotary knob that can be put against the focus ring.

The scale engraved on the focussing ring and the needle on the tube allow depth measurements to an accuracy of 0.1 mm.

This means that the length, housing diameter and the position of the aperture and focus rings are exactly the same on all models.

This special view makes it possible to finely adjust the refocusable depth (i.e. the depth layers which can later be refocused on), which can be influenced by optical focus (via focus ring or tap-to-focus) and zoom level.

With this lens, the focus ring on which your hand usually rests during shooting can be easily moved back and forth to choose between manual and automatic focus.

The digital split image is very useful for those wishing to fully enjoy bokeh while meticulously adjusting the focus ring for more precise focusing.

Focus ring rotation is 180°, balancing the accuracy required for 4K imaging with the speed needed for broadcast use.

Yes, you have to use a finger to slide the silky-smooth focus lever (there are no noisy motors as on AF SLRs), but after that, it's all automatic.

The aperture ring and focus ring are equipped with a gear ring and are therefore optimized for use with Follow Focus systems.

Similarly, a new focusing ring on the lens lets you manually adjust focus with your left hand while keeping your right on the shutter release.

The digital split image function visualizes data from phase detection pixels on either side, so the user can match up the top and bottom images (two sets of left and right sides of an image) with the focus ring during manual focus.

To set precise focus, simply turn the ring so the double images line up in the finder.

The aperture ring and focus ring are equipped with a gear rim and are therefore optimized for use with Follow Focus systems.

After AF has done its job, fulltime MF (manual focus) allows you to make fine adjustments to focus simply by turning the focus ring.

For example, in U.S. Pat. No. 4,456,811 (or EP 0 189 027 A1), the laser beam is shaped into a focused ring by a combined collecting lens/axicon and a conical mirror in such a way that a curved, rotationally-symmetric workpiece surface is impinged perpendicularly by this focus ring and is efficiently machined.

In order to collect the beam in a first focus point and subsequently expand it such that a beam ring occurs, it is not sufficient to work with a focusing lens and only one axicon as is usual in solutions known from the prior art which generate a focus ring on the workpiece surface in a uniform manner.

The aperture ring and the focus ring are equipped with a gear rim and are therefore optimized for use with a follow focus device.

The aperture ring and focus ring are equipped with a gear rim and are therefore optimised for use with Follow Focus systems.

After half pressing the shutter to autofocus on the subject, fine adjustment can then be made using the manual focus ring.

A focus ring is drawn around the currently active field if System 8.0 or later has been installed. The active field can also be identified by the blinking cursor.